ALL ELECTRONICS COMPONENTS

SMB, SS32 20V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMB
2. Maximum respective peak reverse voltage : 20v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 0.45V

150 ohm ( Ω ) 5 watts Fusible ceramic cement power resistors pack of 250pcs

Specifications

1. Resistance : 150 ohm (Ω)
2. Tolerance : 5%
3. Resistor type : fusible ceramic cement power resistor
4. Power rating : 5W
5. Can withstand in high-energy and high-voltages at high temperatures
6. Reliable and offers a long service life

2SC1623 NPN SOT23-3L Bipolar Transistors Pack of 100pcs

Specification :-

• Polarity: NPN
• Maximum Collector-Base Voltage |BVCBO|: 60 V
• Maximum Collector-Emitter Voltage |BVCEO|: 50 V
• Maximum Emitter-Base Voltage |BVEBO|: 5V
• Forward Current Transfer Ratio (hFE), MIN: 90
• Collector Dissipation: Pcw =200mW

AO3401-30V 4A P-Channel MOSFET SOT-23 Pack of 3000

Specification:-

• Gate to Source Voltage: ±12V
• Power Dissipation: 1.4W 
• Number of Pins: 3
• Drain to Source Voltage: -30V
• Continuous Drain Current: 4.2 
• Input Capacitance: 645pF

22uF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 22uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

74LS47 BCD to 7-Segment Decoder/Driver SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -50mA
• Output Current (Low): 3.2A
• Operating Temperature: -55°C to 125°C

3MHz Electronic quartz crystal oscillators KDS3.57954 through hole 2 pins pack of 100pcs

Specification:-

1. High-quality product
2. Load Capacitance:  18pF
3. Frequency Tolerance:  30ppm
4. Frequency Temperature Stability:  20ppm
5. Resonance Resistance:  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift

Electronic Spices 50Pcs 270k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 270k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 270K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

10/50V Electrolytic Capacitor Pack of 5pcs (5×11)mm

Specification:-

• Capacitor Value – 10
• Voltage  - 50V
• Operating temperature: -40ºC to 125ºC
• Tolerance - ±20%
• Size - 5x11

2200uf 35V Aluminum Electrolytic Capacitors (16 X 31.5 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 16 x 31.5 mm
• Impedance (O)max. 20°C 1000KHz = 27
• Ripple current = 2000
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

0.56 inch 1 digit Green display color 7 segment LED display COMMON CATHODEs pack of 50pcs

Specification

1. Number of digit : 1
2. Display type : 7 segment
3. Configuration : common cathode
4. Number of pins : 10
5. LED color : Green
6. Operating current : 10mA
7. Length of the LED : 19mm
8. Width of the LED : 13mm

SYB-170 Yellow color 170 points Mini solderless breadboard for prototype circuits pack of 10pcs

Specification

1. Tie points : 170
2. Color of the board : YELLOW
3. Dimensions : 47mm Length x 35mm breadth
4. Mounting holes : M2
5. Accepts 20-29 AWG wire sizes
6. Use to make the base of the prototype circuit
7. Reusable, solderless, and easy to use