ALL ELECTRONICS COMPONENTS

1.5μF 400V Axial-Type Metallized Polyester Film Capacitors Pack of 5

Specification:-

• Dimensions of Diameter: 11.0mm
• Dimensions of Length: 32.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

SMA, SS210 100V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.85V

Electronic Spices 1000Pcs 680 Ohm (Ω) 2watt ±5% Tolerance 680 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 680 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V

1.8 ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 1.8 ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

0.056μF 563J 400V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V
2. Dimensions = 13.5mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

SMB(G), GS3G 400V Surface Mount General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case : SMB(G)
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 1.1V

2SC3356 NPN SOT23-3L Bipolar Transistors Pack of 100pcs

Specification :-

• Polarity: NPN
• Maximum Collector-Base Voltage |BVCBO|: 20 V
• Maximum Collector-Emitter Voltage |BVCEO|: 12 V
• Maximum Emitter-Base Voltage |BVEBO|: 3V
• Forward Current Transfer Ratio (hFE), MIN: 50
• Collector Dissipation: Pcw =200mW

2.4M ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 2.4M ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watt
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

470uf 6.3V Aluminum Electrolytic Capacitors (8 X 11.5 mm) pack of 5pcs

Specification

• Rating Voltage = 6.3V
• Material = Aluminum
• Capacitor Size = 8 x 11.5 mm
• Impedance (O)max. 20°C 1000KHz = 72
• Ripple current = 400
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

74LS47 BCD to 7-Segment Decoder/Driver SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -50mA
• Output Current (Low): 3.2A
• Operating Temperature: -55°C to 125°C

TL082 JFET Input Operational Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typica
• Low Power Consumption: 1.4 mA/ch Typical
• Wide Common-Mode and Differential Voltage Ranges

BC557 Bipolar PNP transistors box of 2000pcs

Specification

1. Transistor type  :  Bipolar PNP Transistor
2. DC Current Gain  :  300
3. Continuous Collector current  :  100mA
4. Emitter Base Voltage  :  6V
5. Base Current  :  5mA