ALL ELECTRONICS COMPONENTS

1N4004G 400V ,DO-41 Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 400V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-41

DO-201AD, BY251 200V General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 200v
2. Maximum average rectified current : 3.0A
3. Maxim reverse current : 10µA
4. Case :  DO-201AD 
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 1.1V

UF3G 400V ,Surface Mount High Efficiency Rectifiers Pack of 5pcs

Specification:-

1. Package : SMB(G),SMC(G)
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 3.0A
4. Forward peak surge current@8.3ms single half sine-wave : 100A
5. Maximum reverse current : 10µa
6. Maximum reverse recovery time : 50ns

SOT-23, BAT54A 70V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : SOT-23
2. Maximum respective peak reverse voltage : 70v
3. Maximum average rectified current : 200A
4. Maxim reverse current : 2µA
5. Maxim forward voltage : 0.24V

DO-41, 1N4934G 100V Glass Passivated Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : DO-41
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 1.3V
7. Maximum reverse recovery time : 200ns

RS-2, KBP01 2A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : RS-2
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 2.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

74HC151 8 – Input Multiplexer SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• DC Output Current, per pin: ± 25mA
• Operating Voltage Range: 2.0 to 6.0 V
• Low input current: 1 µA maximum
• Typical propagation delay: 26 ns

24C02 2K bit Serial I2C Bus EEPROM IC DIP-8 Package

Specification:-

• Read current 1 mA, max.
• Single-Supply with Operation from: 4.5V to 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VCC +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temperature with power applied: 40°C to +125°C
• ESD protection on all pins: ≥ 4 kV

1H1 50V ,R-1 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 50V
• Peak forward surge current 8.3ms single half sine- wave : 25A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : R-1

2.2uf / 160V Aluminum Electrolytic Capacitors (6.3 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 6.3 X 11mm
4. Voltage Rating :  160V
5. Capacitance: 2.2uf
6. Capacitance tolerance : ±20%(M)

10000uf 10V Aluminum Electrolytic Capacitors (18 X 35.5 mm) pack of 5pcs

Specification

• Rating Voltage = 10V
• Material = Aluminum
• Capacitor Size = 18 x 35.5 mm
• Impedance (O)max. 20°C 1000KHz = 18
• Ripple current = 2000
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

200 ohm ( Ω ) single turn trimpot variable resistors 3386P-1-201LF pack of 20pcs

Specifications:-

1. Type: Single-turn variable resistor
2. Resistance value: 200 Ω
3. Power rating: 300V
4. Temperature Range: -55 °C to +125 °C
5. Rotational cycle: 200 cycles