ALL ELECTRONICS COMPONENTS

INA118 Low Power Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Packages: 8-Pin
• Supply Voltage: ±18 V
• Analog input voltage : ±40 V
• Wide supply range: ±1.35 to ±18 V
• Low quiescent current: 350 µA
• Low offset voltage: 50 µV, maximum
• Low drift: 0.5 µV/°C, maximum
• Low input bias current: 5 nA, maximum
• Storage temperature: -40°C to 125 °C

0.0047μF 472J 630V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 11.0mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance =  ≤7500M Ω

0.018μF 183J 630V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 630V
• Dimensions = 24.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMBJ100 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 111.00V
3. Maximum Breakdown voltage : 135V
4. Stand-off voltage : 100.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.4A
7. Maximum clamping voltage : 179.0V
8. Power dissipation : 600W

16K ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 16K
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

2K ohm ( Ω ) single turn trimpot variable resistors 3386P-1-202LF pack of 50pcs

Specifications:-

1. Type                            : Single turn variable resistor
2. Resistance value       : 2K Ω
3. Power rating              : 300V
4. Temperature Range : -55 °C to +125 °C
5. Rotational cycle        : 200 cycles

0.0047μF 472J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.5mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

UF3M 1000V ,Surface Mount High Efficiency Rectifiers Pack of 5pcs

Specification:-

1. Package : SMB(G),SMC(G)
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 3.0A
4. Forward peak surge current@8.3ms single half sine-wave : 100A
5. Maximum reverse current : 10µa
6. Maximum reverse recovery time : 75ns

SMB(G), GS3K 800V Surface Mount General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case : SMB(G)
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 1.1V

SMA, SS23 30V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 30v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.45V

330uf / 250V Aluminum Electrolytic Capacitors (25 x 35)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 25 x 35mm
4. Voltage Rating :  250V
5. Capacitance: 330uf
6. Capacitance tolerance : ±20%(M)

9015 Bipolar PNP transistors box of 2000pcs

Specification

1. Transistor Type  :  9015 Bipolar PNP transistor
2. Max Collector Current  :  -100mA
3. Max Collector-Emitter Voltage  :  -45V
4. Max Collector-Base Voltage  :  -50V
5. Max Emitter-Base Voltage  :  -5V
6. Max Collector Dissipation  :  400mW