ALL ELECTRONICS COMPONENTS

INA118 Low Power Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Packages: 8-Pin
• Supply Voltage: ±18 V
• Analog input voltage : ±40 V
• Wide supply range: ±1.35 to ±18 V
• Low quiescent current: 350 µA
• Low offset voltage: 50 µV, maximum
• Low drift: 0.5 µV/°C, maximum
• Low input bias current: 5 nA, maximum
• Storage temperature: -40°C to 125 °C

SMB, SS33 30V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMB
2. Maximum respective peak reverse voltage : 30v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 0.55V

SR2020C 20V ,TO-220AB Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 20V
• Maximum average rectified current : 20A
• Peak forward surge current 8.3ms single half sine- wave : 150A
• Maximum reverse current @ VRRM TA = 25°C : 1.0mA 
• Package : TO-220AB

1000uf 10V Aluminum Electrolytic Capacitors (10 X 16 mm) pack of 5pcs

Specification

• Rating Voltage = 10V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 56
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

0.47uf / 100V Aluminum Electrolytic Capacitors (5 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 5 x11mm
4. Voltage Rating :  100V
5. Capacitance: 0.47uf
6. Capacitance tolerance : ±20%(M)

0.056μF 563J 630V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 20.0mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 16.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

KBPC25-W, MB356W 35A 600V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25-W
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Maxim forward voltage : 1.1V

10uF 16V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 10uF
• Rated Voltage: 16V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

220uf / 16V Aluminum Electrolytic Capacitors (6.3 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 6.3 X 11mm
4. Voltage Rating :  16V
5. Capacitance: 220uf
6. Capacitance tolerance : ±20%(M)

22uf 63V Aluminum Electrolytic Capacitors (6.3 X 11 mm) Pack of 5pcs

Specification

• Rating Voltage = 63V
• Material = Aluminum
• Capacitor Size = 6.3 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 350
• Ripple current = 140
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

74HC595 8-bit Serial to Parallel Shift Register IC DIP-16 Package

Specification:-

• Number of pins: 16
• Mounting: Through Hole
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

270uf 450V Aluminum Electrolytic Capacitors (35 x 40mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 35 x 40mm
  
• Ripple current = 1.78
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"