ALL ELECTRONICS COMPONENTS

KBPC25-W, MB2510W 25A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25-W
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V

MM3ZB12 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 12V
• Minimum Zener voltage : 11.76V
• Maximum Zener voltage : 12.24V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

INA128 Low Power Instrumentation Amplifier SMD IC

Specification:-

• IC Name: INA128 
• Low Offset Voltage: 25 uv Typical
• Low Input Bias Current: 50 nA Typical (t)
• High CMR: 95 dB Typical”)
• Inputs Protected to ± 40V
• Wide Supply Range: ±2.25 V to ± 18V
• Low Quiescent Current: 2 mA Typical

MM1Z5265B 500mW SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 62V
• Minimum Zener voltage : 58.9V
• Maximum Zener voltage : 65.1V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

0.068μF 683J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 9.0mm
8. Dimensions of Length : 28.0mm

0.022μF 223J 400VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400 VAC
• Dimensions = 14.0mm(W)
• Dimensions = 15.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

4.7uF 475K 250V CBB21 Metallized Polypropylene Film Capacitor Pack of 200

Specification:-

• Rated voltage: 250V
• Tolerance: 10%
• Dimensions = 28.0mm (W)
• Dimensions = 20.0mm (H)
• Dimensions = 8.0mm (T)
• Dimensions = 22.0mm (P)

0.015μF 153K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.0mm(T)
5. Dimensions = 5.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

0.18μF 184J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 29.0mm(W)
• Dimensions = 18.0mm(H)
• Dimensions = 11.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

HER104S 300V ,A-405 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 300V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : A-405

SMA(G), ER2A 50V Surface Mount Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA(G) 
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 2.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.95V

GNJ6, GBJ1501 15A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GNJ6
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 15.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 200A
6. Maxim forward voltage : 1.1V