ALL ELECTRONICS COMPONENTS

0.015μF 153J 250V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 250V
• Dmax = 5.0mm
• Lmax = 13.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

74HC154 4-Line to 16-Line Decoder/Demultiplexer SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Voltage: − 1.5 to VCC + 1.5V
• DC Output Voltage: − 0.5 to VCC + 0.5V
• DC Output Current, per pin: ± 25mA
• Operating Voltage Range: 2.0 to 6.0 V
• Low input current: 1 µA maximum
• Typical propagation delay: 21 ns

AD620 Low Power Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: ±18 V
• Internal Power Dissipation: 650 mW
• Input Voltage (Common-Mode) ±VS
• Differential Input Voltage: 25 V
• Output Short-Circuit Duration: Indefinite
• Storage Temperature Range: −65°C to +150°C
• Storage Temperature Range: −65°C to +125°C
• Lead Temperature Range: 300°C

0.027μF 273J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 17.0mm(W)
• Dimensions = 14.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

1H3 200V ,R-1 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 200V
• Peak forward surge current 8.3ms single half sine- wave : 25A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : R-1

UF2J 600V ,Surface Mount High Efficiency Rectifiers Pack of 5pcs

Specification:-

1. Package : SMB(G)
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 2.0A
4. Forward peak surge current@8.3ms single half sine-wave : 50A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 75ns

47uf 63V Aluminum Electrolytic Capacitors (8 X 11.5 mm) Pack of 5pcs

Specification

• Rating Voltage = 63V
• Material = Aluminum
• Capacitor Size = 8 x 11.5 mm
• Impedance (O)max. 20°C 1000KHz = 220
• Ripple current = 210
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

GBJ6, GBJ601 6A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.0V

3.3uf / 100V Aluminum Electrolytic Capacitors (5 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 5 x11mm
4. Voltage Rating :  100V
5. Capacitance: 3.3uf
6. Capacitance tolerance : ±20%(M)

MM1ZB75 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 75V
• Minimum Zener voltage : 73.50V
• Maximum Zener voltage : 76.50V
• Maximum Reverse Current : 0.2µa
• Package : SOD-123

AM2149-55PC 1024 x 4 Static RAM 55ns NMOS 18-PDIP Memory IC

Specification:-

• Package: 18-pin PDIP
• Technology: NMOS
• Number of Pins: 18
• Supply Voltage-Max (Vsup): 5.5 V
• Supply Voltage-Min (Vsup): 4.5 V
• Supply Voltage-Nom (Vsup): 5 V
• Supply Current-Max 0.18 mA
• Terminal Position: Dual
• Memory Density: 4096 bit

82µF 400V Aluminum Electrolytic Capacitors (18 x 30 mm) Pack of 5pcs

Specification:

• Rating Voltage = 400V
• Material = Aluminum
• Capacitor Size = 18 x 30 mm
• Ripple current = 0.5
• Case Dia = D=16?18
• DC Leakage Current = ≤ 0.03CV+10 (uf) at 20°C
• Shelf Life = After storage for 1000 Hrs at + 105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”