ALL ELECTRONICS COMPONENTS

0.082μF 823J 250VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250VAC
• Dimensions = 17.5mm(W)
• Dimensions = 17.5mm(H)
• Dimensions = 12.0mm(T)
• Dimensions = 12.5mm(P)
• Dimensions = 0.6(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

2200uf / 10V Aluminum Electrolytic Capacitors (10 X 20)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 10 X 16mm
4. Voltage Rating :  10V
5. Capacitance: 2200uf
6. Capacitance tolerance : ±20%(M)

74LS73 Dual JK Flip-Flop SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current: -0.4mA
• Output Current: 8mA
• Operating Temperature: 0°C to 70°C

1.5KE200A 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 190.0V
• Maximum Breakdown voltage: 210.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 5.5A
• Maximum clamping voltage: 274.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 1500W
• Package: DO-201AD

1.5KE22 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 19.8V
• Maximum Breakdown voltage: 24.2V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 47.0A
• Maximum clamping voltage: 31.9V
• Maximum Temperature Coefficient of VBR: 0.092%
• Power Dissipation: 1500W
• Package: DO-201AD

FR103S 200V ,A-405 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 200V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 150ns
• Package : A-405

IRF9640 200V 11A P-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: P-Channel
• Drain-Source Breakdown Voltage (Vds): -200V
• Continuous Drain Current (Id): -11A
• Drain-Source Resistance (Rds On): 0.5Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 44 nC
• Operating Temperature Range: -55 to 150°C
• Power Dissipation (Pd): 125W

KBPC8, KBPC802 8A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC8
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 8.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

74HC244 Octal Buffer Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Supply voltage: 2.0V – 6.0V
• Input Voltage: 7V
• 8-bit 3 states buffer
• Octal bus interface
• Non-inverting 3-state outputs
• Complies with JEDEC standard no. 7 A

0.027μF 273J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.0mm(H)
4. Dimensions = 4.0mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

0.22μF 224J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 29.0mm(W)
• Dimensions = 24.0mm(H)
• Dimensions = 14.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

0.033μF 333J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 19.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 12.5mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)