ALL ELECTRONICS COMPONENTS

270 ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

• Case type: 1206
• Resistance: 270K
• Tolerance :  ± 5%
• Power Rating (Watt) : 0.25W, 1/4W
• Operating Temperature : -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

5KP15 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 16.7V
• Maximum Breakdown voltage: 20.4V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 188A
• Maximum clamping voltage: 26.9V
• Power Dissipation: 5000W
• Package: R-6

SA7.5A 50µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 8.33 , Max(V) 9.21
• Maximum peak current : 38.8A
• Maximum reverse leakage current @ VRWM : 50µA
• Power dissipation :500W
• Package : DO-15

SMA(G), ER1B 100V Surface Mount Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA(G)
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 0.95V

P4KE8.2A 200µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 7.79 , Max(V) 8.61
• Maximum peak current : 35A
• Maximum reverse leakage current @ VRRM : 200µA
• Package : DO-41

Metal Oxide Through-Hole Varistor (MOV-14D390K) Pack of 5

Specification:-

• Voltage Rating AC: 250V
• Voltage Rating DC: 320V
• Max Clamp Voltage: 650V
• Varistor Case: 14mm Disc
• Number of pole: 2
• Mounting type  : PCB

SMA, SMAJ30A, 30.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 30.0v
3. Maximum average rectified current : 6.2A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 48.4V

KBPC8, KBPC804 8A 400V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC8
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 8.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)

5KP78A 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 86.7V
• Maximum Breakdown voltage: 95.8V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 40A
• Maximum clamping voltage: 126.0V
• Power Dissipation: 5000W
• Package: R-6

P4KE11 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 9.90 , Max(V) 12.1
• Maximum peak current : 26A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41