ALL ELECTRONICS COMPONENTS

0.033μF 333J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 19.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 12.5mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

MM3Z4B3 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 4.3V
• Minimum Zener voltage : 4.214V
• Maximum Zener voltage : 4.386V
• Maximum Reverse Current : 5.0µa
• Package : SOD-323

5KP78A 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 86.7V
• Maximum Breakdown voltage: 95.8V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 40A
• Maximum clamping voltage: 126.0V
• Power Dissipation: 5000W
• Package: R-6

0.0012μF 122J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 11.0mm(W)
• Dimensions = 10.0mm(H)
• Dimensions = 5.0mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMC(G) SMCJ12A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 12.0V
3. Maximum peak pulse current : 75.4A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 19.9V
6. Power dissipation : 1500W

GBJ6, GBJ2006 20A 600V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 20.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

470uf / 100V Aluminum Electrolytic Capacitors (30 x 30)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 30 x 30mm
4. Voltage Rating :  100V
5. Capacitance: 470uf
6. Capacitance tolerance : ±20%(M)

FR2G 400V ,Surface Mount Fast Recovery Rectifiers Pack of 5pcs

Specification:-

1. Package : SMB(G)
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 2.0A
4. Forward peak surge current@8.3ms single half sine-wave : 50A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 150ns

HER101S 50V ,A-405 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 50V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : A-405

SMA, SMAJ8.5, 8.5V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 8.5v
3. Maximum average rectified current : 18.9A
4. Maxim reverse current : 20µA
5. Maxim forward voltage : 15.9V

270 ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

• Case type: 1206
• Resistance: 270K
• Tolerance :  ± 5%
• Power Rating (Watt) : 0.25W, 1/4W
• Operating Temperature : -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)