ALL ELECTRONICS COMPONENTS

FR2G 400V ,Surface Mount Fast Recovery Rectifiers Pack of 5pcs

Specification:-

1. Package : SMB(G)
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 2.0A
4. Forward peak surge current@8.3ms single half sine-wave : 50A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 150ns

SMC(G) SMCJ110A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 110.0V
3. Maximum peak pulse current : 8.5A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 177V
6. Power dissipation : 1500W

GBJ4, GBJ402 4A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ4
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 4.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 120A
6. Maxim forward voltage : 1.1V

0.0056μF 562J 100V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 100V
• Dimensions = 11.0mm(W)
• Dimensions = 10.0mm(H)
• Dimensions = 6.0mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

5KP33A 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 36.7V
• Maximum Breakdown voltage: 40.6V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 94A
• Maximum clamping voltage: 53.3V
• Power Dissipation: 5000W
• Package: R-6

0.68μF 684J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 21.0mm
8. Dimensions of Length : 33.0mm

UF1G 400V ,Surface Mount High Efficiency Rectifiers Pack of 5pcs

Specification:-

1. Package : SMA(G)
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 1.0A
4. Forward peak surge current@8.3ms single half sine-wave : 30A
5. Maximum reverse current : 5.0µA
6. Maximum reverse recovery time : 50ns

RS2G 400V ,Surface Mount Fast Recovery Rectifiers Pack of 5pcs

Specification:-

1. Package : SMA/SMB
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 2.0A
4. Forward peak surge current@8.3ms single half sine-wave : 50A
5. Maximum reverse current : 5.0µa
6. Maximum reverse recovery time : 150ns

SMAJ150 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 167.00V
3. Maximum Breakdown voltage : 204V
4. Stand-off voltage : 150.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.1A
7. Maximum clamping voltage : 268.0V
8. Power dissipation : 400W

MM3Z5256B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 30V
• Minimum Zener voltage : 28.5V
• Maximum Zener voltage : 31.5V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)

MAX3232 RS-232 Transceivers SMD IC

Specification:-

• Mounting Type: Surface Mount
• Operating Voltage: 3V to 5.5V
• Input Levels: ±30-V
• Operating current: 8mA
• Can work with 5V and 3.3V logic devices
• TTL/CMOS to RS232 Converter IC