ALL ELECTRONICS COMPONENTS

MM3Z4B3 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 4.3V
• Minimum Zener voltage : 4.214V
• Maximum Zener voltage : 4.386V
• Maximum Reverse Current : 5.0µa
• Package : SOD-323

PMLL4148L 100V MINI MELF High Speed Switching Diodes Pack of 50

Specification:-

• Package: SOD80C
• Mounting Type: SMD
• Part Number: PMLL4148L
• Max. forward voltage: 1V
• Max. forward impulse current: 4A
• Load current: 0.2A
• Max. load current: 0.45A
• Power dissipation: 0.5W

5KP28A 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 31.1V
• Maximum Breakdown voltage: 34.4V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 110A
• Maximum clamping voltage: 45.4V
• Power Dissipation: 5000W
• Package: R-6

5KP8.5A 50µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 9.44V
• Maximum Breakdown voltage: 10.4V
• Maximum Reverse Leakage Current: 50µa
• Maximum peak pulse current: 347A
• Maximum clamping voltage: 14.4V
• Power Dissipation: 5000W
• Package: R-6

0.033μF 333J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 19.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 12.5mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

KBPC-25W, MB154W 15A 400V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC-25W
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 15.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 200A
6. Maxim forward voltage : 1.1V

SMAJ150A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 167.00V
3. Maximum Breakdown voltage : 185V
4. Stand-off voltage : 150.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.2A
7. Maximum clamping voltage : 243.0V
8. Power dissipation : 400W

SMAJ150 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 167.00V
3. Maximum Breakdown voltage : 204V
4. Stand-off voltage : 150.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.1A
7. Maximum clamping voltage : 268.0V
8. Power dissipation : 400W

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)

MM1Z2B7 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 2.7V
• Minimum Zener voltage : 2.646V
• Maximum Zener voltage : 2.754V
• Maximum Reverse Leakage Current : 120µa
• Package : SOD-123

0.68μF 684J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 21.0mm
8. Dimensions of Length : 33.0mm

SMC(G) SMCJ12A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 12.0V
3. Maximum peak pulse current : 75.4A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 19.9V
6. Power dissipation : 1500W