ALL ELECTRONICS COMPONENTS

INA125 Instrumentation Amplifier with Precision Voltage Reference SMD IC

Specification:-

• Supply Voltage: 36V
• Input Signal Voltage: ±40V
• Output Short Circuit: Continuous
• Operating Temperature: –55°C to +125°C
• Storage Temperature: –55°C to +125°C
• Lead Temperature DIP: +300°C
• Low Quiescent Current: 460µa
• Low Offset Drift: 2µv/°C Max

IRFP240 200V 20A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): -200V
• Continuous Drain Current (Id): 20A
• Drain-Source Resistance (Rds On): 0.18 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 70 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 150W

5KP100 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 111V
• Maximum Breakdown voltage: 136.0V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 28A
• Maximum clamping voltage: 179.0V
• Power Dissipation: 5000W
• Package: R-6

P4KE15 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 13.5 , Max(V) 16.5
• Maximum peak current : 19A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

P6KE51A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 48.5V
• Maximum Breakdown voltage: 53.6V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 8.6A
• Maximum clamping voltage: 70.1V
• Maximum Temperature Coefficient of VBR: 0.102%
• Power Dissipation: 600W
• Package: DO-15

SMBJ7.0A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 7.78V
3. Maximum Breakdown voltage : 8.60V
4. Stand-off voltage : 7.0
5. Maximum reverse leakage current : 200
6. Maximum peak pulse current : 50.0A
7. Maximum clamping voltage : 12.0V
8. Power dissipation : 600W

MM1ZB12 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 12V
• Minimum Zener voltage : 11.76V
• Maximum Zener voltage : 12.24V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

0.0039μF 392J 630V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 630V
• Dimensions = 16.0mm(W)
• Dimensions = 13.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

1N5396G 500V ,DO-15 Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 500V
• Maximum average rectified current : 1.5A
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-15

SMAJ54A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 60.00V
3. Maximum Breakdown voltage : 66.3V
4. Stand-off voltage : 54.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.4A
7. Maximum clamping voltage : 87.1V
8. Power dissipation : 400W

0.0082μF 822J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 17.0mm(W)
• Dimensions = 14.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

DO-201AD, UF5405 500V High Efficiency Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 500v
2. Maximum average rectified current : 3.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-201AD
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.7V
7. Maximum reverse recovery time : 75ns