ALL ELECTRONICS COMPONENTS

INA125 Instrumentation Amplifier with Precision Voltage Reference SMD IC

Specification:-

• Supply Voltage: 36V
• Input Signal Voltage: ±40V
• Output Short Circuit: Continuous
• Operating Temperature: –55°C to +125°C
• Storage Temperature: –55°C to +125°C
• Lead Temperature DIP: +300°C
• Low Quiescent Current: 460µa
• Low Offset Drift: 2µv/°C Max

5KP100 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 111V
• Maximum Breakdown voltage: 136.0V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 28A
• Maximum clamping voltage: 179.0V
• Power Dissipation: 5000W
• Package: R-6

SA70 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 77.8 , Max(V) 95.1
• Maximum peak current : 4.0A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P4KE15 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 13.5 , Max(V) 16.5
• Maximum peak current : 19A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

DO-201AD, UF5405 500V High Efficiency Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 500v
2. Maximum average rectified current : 3.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-201AD
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.7V
7. Maximum reverse recovery time : 75ns

SMC(G) SMCJ14A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 14.0V
3. Maximum peak pulse current : 64.7A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 23.2V
6. Power dissipation : 1500W

MM1ZB12 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 12V
• Minimum Zener voltage : 11.76V
• Maximum Zener voltage : 12.24V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

1.5KE180 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 162.0V
• Maximum Breakdown voltage: 198.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 5.8A
• Maximum clamping voltage: 258.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 1500W
• Package: DO-201AD

P6KE51A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 48.5V
• Maximum Breakdown voltage: 53.6V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 8.6A
• Maximum clamping voltage: 70.1V
• Maximum Temperature Coefficient of VBR: 0.102%
• Power Dissipation: 600W
• Package: DO-15

SMBJ6.5A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 7.22V
3. Maximum Breakdown voltage : 7.98V
4. Stand-off voltage : 6.5
5. Maximum reverse leakage current : 500
6. Maximum peak pulse current : 53.6A
7. Maximum clamping voltage : 11.2V
8. Power dissipation : 600W

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

5KP24 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 26.7V
• Maximum Breakdown voltage: 32.6V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 116A
• Maximum clamping voltage: 43.0V
• Power Dissipation: 5000W
• Package: R-6