ALL ELECTRONICS COMPONENTS

1N5396G 500V ,DO-15 Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 500V
• Maximum average rectified current : 1.5A
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-15

SMAJ54A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 60.00V
3. Maximum Breakdown voltage : 66.3V
4. Stand-off voltage : 54.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.4A
7. Maximum clamping voltage : 87.1V
8. Power dissipation : 400W

PMBTA42 100mA NPN Transistors 300V (SOT-23 Package) Pack of 3000

Specification:-

• Type of transistor: NPN
• Collector-Emitter Voltage, max:  300 V
• Collector-Base Voltage, max: 300 V
• Power Dissipation: 250 mW
• Transition Frequency, min: 50 MHz
• Operating and Storage Junction Temperature Range: -65 to +150 °C
• Package: SOT-23

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

5KP24 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 26.7V
• Maximum Breakdown voltage: 32.6V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 116A
• Maximum clamping voltage: 43.0V
• Power Dissipation: 5000W
• Package: R-6

0.0082μF 822J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 17.0mm(W)
• Dimensions = 14.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

GBJ6, GBJ3502 35A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

SMBJ15 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 16.7V
3. Maximum Breakdown voltage : 20.4V
4. Stand-off voltage : 15.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 22.3A
7. Maximum clamping voltage : 26.9V
8. Power dissipation : 600W

SA120A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 133 , Max(V) 147.0
• Maximum peak current : 2.6
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

MM1Z5261B 500mW SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 47V
• Minimum Zener voltage : 44.65V
• Maximum Zener voltage : 49.35V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

IR2111 Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic input Voltage: -0.3 to VSS+0.3 V

5KP51 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 56.7V
• Maximum Breakdown voltage: 69.3V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 55A
• Maximum clamping voltage: 91.1V
• Power Dissipation: 5000W
• Package: R-6