ALL ELECTRONICS COMPONENTS

RL201G 50V, DO-15 Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 50V
• Maximum average rectified current : 2.0A
• Peak forward surge current 8.3ms single half sine- wave : 70A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-15

200K ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 0603
• Resistance: 200K
• Tolerance:  ± 5%
• Power Rating (Watt): 0.25W, 1/4W
• Operating Temperature: -55 °C to +155 °C
• Element type : Thick film chip
• Operating voltage range: 180V to 220V

MC33078 Dual High Speed Low Noise Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply voltage (VCC+): 18 V
• Supply voltage (VCC-): -18 V
• Input current: ±10 m A
• Supply voltage (VCC+ to VCC-): 36 V
• Low Noise Voltage 4.5 nV/√Hz
• Large Output-Voltage Swing 14.1 V to
• Storage temperature range: –65°C to150 °C

1.5KE8.2 200µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 7.38V
2. Maximum Breakdown voltage: 9.02V
3. Maximum Reverse Leakage Current: 200µa
4. Maximum peak pulse current: 120A
5. Maximum clamping voltage: 12.5V
6. Maximum Temperature Coefficient of VBR: 0.065%
7. Power Dissipation: 1500W
8. Package: DO-201AD

0.068μF 683J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 19.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 11.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMA, SMAJ8.0, 8.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 8.0v
3. Maximum average rectified current : 20.0A
4. Maxim reverse current : 50µA
5. Maxim forward voltage : 15.0V

SMBJ10A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 11.1V
3. Maximum Breakdown voltage : 12.3V
4. Stand-off voltage : 10.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 35.3A
7. Maximum clamping voltage : 17.0V
8. Power dissipation : 600W

SA64A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 71.1 , Max(V) 78.6
• Maximum peak current : 4.9A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

SMC(G) SMCJ60 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 60.0V
3. Maximum peak pulse current : 14.0A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 107V
6. Power dissipation : 1500W

SMBJ9.0A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 10.0V
3. Maximum Breakdown voltage : 11.1V
4. Stand-off voltage : 9.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 39.0A
7. Maximum clamping voltage : 15.4V
8. Power dissipation : 600W

2200uf 6.3V Aluminum Electrolytic Capacitors (13 X 20 mm) pack of 5pcs

Specification

• Rating Voltage = 6.3V
• Material = Aluminum
• Capacitor Size = 13 x 20 mm
• Impedance (O)max. 20°C 1000KHz = 38
• Ripple current = 1300
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

GBJ6, GBJ8005 8A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 8.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 170A
6. Maxim forward voltage : 1.1V