ALL ELECTRONICS COMPONENTS

ICL7650S Super Chopper Stabilized Op-Amplifier IC (DIP-14 Package)

Specification:-

• Supply Voltage: 18 V
• Current to Any Pin: 10mA
• High Slew Rate 2.5V/µs
• Wide Bandwidth 2MHz
• Extremely High Gain 150dB
• Reduced Supply Current 2mA
• Guaranteed Max Input Bias Current 10pA
• Voltage on Oscillator Control Pins: V+ to V
• Input Voltage: (V+ +0.3) to (V- -0.3)

1.5KE47 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 42.3V
2. Maximum Breakdown voltage: 51.7V
3. Maximum Reverse Leakage Current: 5.0µa
4. Maximum peak pulse current: 22.2A
5. Maximum clamping voltage: 67.8V
6. Maximum Temperature Coefficient of VBR: 0.101%
7. Power Dissipation: 1500W
8. Package: DO-201AD

P4KE130A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 124.0 , Max(V) 137.0
• Maximum peak current : 2.3A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

0.0047μF 472J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 14.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 7.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

0.012μF 123J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 19.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

MM1ZB11 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 11V
• Minimum Zener voltage : 10.78V
• Maximum Zener voltage : 11.22V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

GBJ6, GBJ602 6A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.0V

KA2281 5-Dot Dual Led Level Meter Driver 16 DIP IC Pack of 2

Specification:-

• Supply Voltage : 16V
• D Terminal Output Current: 30mA
• Power Dissipation: 600mW
• Operating Temperature: -20°C + 70°C
• Storage Temperature: -40°C + 125°C

SA14A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 15.6 , Max(V) 17.2
• Maximum peak current : 21.5A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

5KP9.0A 20µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 10.0V
• Maximum Breakdown voltage: 11.1V
• Maximum Reverse Leakage Current: 20µa
• Maximum peak pulse current: 325A
• Maximum clamping voltage: 15.4V
• Power Dissipation: 5000W
• Package: R-6

0.047μF 473J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 9.5mm
8. Dimensions of Length : 20.5mm

SMAJ160 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 178.00V
3. Maximum Breakdown voltage : 218V
4. Stand-off voltage : 160.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.0A
7. Maximum clamping voltage : 287.0V
8. Power dissipation : 400W