ALL ELECTRONICS COMPONENTS

1.5KE10A 10µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

1. Minimum Breakdown voltage: 9.50V
2. Maximum Breakdown voltage: 10.5V
3. Maximum Reverse Leakage Current: 10µa
4. Maximum peak pulse current: 103A
5. Maximum clamping voltage: 14.5V
6. Maximum Temperature Coefficient of VBR: 0.073%
7. Power Dissipation: 1500W
8. Package: DO-201AD

5KP6.0A 5000µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 6.67V
• Maximum Breakdown voltage: 7.37V
• Maximum Reverse Leakage Current: 5000µa
• Maximum peak pulse current: 485A
• Maximum clamping voltage: 10.3V
• Power Dissipation: 5000W
• Package: R-6

0.15μF 154J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 6.5mm
• Lmax = 20.5mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

SMBJ75A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 83.30V
3. Maximum Breakdown voltage : 92.1V
4. Stand-off voltage : 75.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 5.0A
7. Maximum clamping voltage : 121.0V
8. Power dissipation : 600W

SMBJ14A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 15.6V
3. Maximum Breakdown voltage : 17.2V
4. Stand-off voltage : 14.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 25.9A
7. Maximum clamping voltage : 23.2V
8. Power dissipation : 600W

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

SMA, SMAJ7.5, 7.5V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 7.5v
3. Maximum average rectified current : 21.0A
4. Maxim reverse current : 100µA
5. Maxim forward voltage : 14.3V

MM1Z5253B 500mW SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 25V
• Minimum Zener voltage : 23.75V
• Maximum Zener voltage : 26.25V
• Maximum Reverse Current : 0.1µa
• Package : SOD-123

SMBJ40A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 44.40V
3. Maximum Breakdown voltage : 49.1V
4. Stand-off voltage : 40.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 9.3A
7. Maximum clamping voltage : 64.5V
8. Power dissipation : 600W

SMA, SMAJ8.0A, 8.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 8.0v
3. Maximum average rectified current : 21.1A
4. Maxim reverse current : 50µA
5. Maxim forward voltage : 13.6V

390uf / 200V Aluminum Electrolytic Capacitors (30 x 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 30 x 25mm
4. Voltage Rating :  200V
5. Capacitance: 390uf
6. Capacitance tolerance : ±20%(M)

SA26A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 28.9 , Max(V) 31.9
• Maximum peak current : 11.9A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15