ALL ELECTRONICS COMPONENTS

SA18 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 20.0 , Max(V) 24.4
• Maximum peak current : 15.5A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

0.056μF 563J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 29.0mm(W)
• Dimensions = 20.0mm(H)
• Dimensions = 11.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

MM3Z5B6 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 5.6V
• Minimum Zener voltage : 5.488V
• Maximum Zener voltage : 5.712V
• Maximum Reverse Current : 1.0µa
• Package : SOD-323

OP07 Ultralow Offset Voltage Operational Amplifier SMD IC

Specification:-

• IC Name: OP07 
• Supply Voltage: ±22V
• Input Voltage: ±22V
• Differential Input Voltage: ±30V
• Low noise: 0.6 μV p-p maximum
• Wide supply voltage range: ±3 V to ±18 V
• Storage Temperature Range: −65˚C to +150˚C

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

5KP64 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 71.1V
• Maximum Breakdown voltage: 86.9V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 44A
• Maximum clamping voltage: 114V
• Power Dissipation: 5000W
• Package: R-6

P4KE350A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 332.0 , Max(V) 368.0
• Maximum peak current : 0.83A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

P4KE10A 10µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 9.50 , Max(V) 10.5
• Maximum peak current : 29A
• Maximum reverse leakage current @ VRRM : 10µA
• Package : DO-41

P6KE300 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 270.0V
• Maximum Breakdown voltage: 330.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 1.4A
• Maximum clamping voltage: 430.0V
• Maximum Temperature Coefficient of VBR: 0.110%
• Power Dissipation: 600W
• Package: DO-15

SMBJ150 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 167.00V
3. Maximum Breakdown voltage : 204V
4. Stand-off voltage : 150.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 2.2A
7. Maximum clamping voltage : 268.0V
8. Power dissipation : 600W

SMA, SMAJ17, 17.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 17.0v
3. Maximum average rectified current : 9.8A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 30.5V

SMBJ28 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 31.1V
3. Maximum Breakdown voltage : 38.0V
4. Stand-off voltage : 28.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 12.0A
7. Maximum clamping voltage : 50.0V
8. Power dissipation : 600W