ALL ELECTRONICS COMPONENTS

MM3Z5225B 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 3.0V
• Minimum Zener voltage : 2.85V
• Maximum Zener voltage : 3.15V
• Maximum Reverse Current : 50µa
• Package : SOD-323

SMBJ11A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 12.2V
3. Maximum Breakdown voltage : 13.5V
4. Stand-off voltage : 11.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 33.0A
7. Maximum clamping voltage : 18.2V
8. Power dissipation : 600W

0.33μF 334J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 9.5mm
• Lmax = 28.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

AM29F400BB90SI FLASH - NOR Memory IC 4Mbit Parallel 90ns 44-SOIC

Specification:-

• Memory Size: 4Mbit (512K x 8-bit / 256K x 16-bit)
• Access Time: 90ns
• Technology: CMOS
• Package: 44-pin SOIC
• Operating Voltage: Typically 3.0V to 3.6V
• Power Consumption: Low power consumption due to CMOS technology
• Operating Temperature Range: Typically -40°C to 85°C

74HC244 Octal Buffer/Line Driver with Tri-State Output SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 7V
• Input Voltage: 7V
• Typical propagation delay: 12 ns
• Typical operating frequency: 50 MHz
• Temperature Range: -65°C to 150°C
• Typical IOL (sink current) 24 mA
• Typical IOH (source current) −15 mA

P6KE120 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 108.0V
• Maximum Breakdown voltage: 132.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 3.5A
• Maximum clamping voltage: 173.0V
• Maximum Temperature Coefficient of VBR: 0.107%
• Power Dissipation: 600W
• Package: DO-15

74HC04 Hex Inverter IC (7404 IC) DIP-14 Package

Specification:-

• Number of pins: 14
• Type: DIP Bipolar
• Mounting: Through Hole
• Voltage Rating: 4.75 to 5.25V
• Current Rating (Max): 16mA
• Operating Temperature:  0°C to + 70°C

MC33078 Dual High Speed Low Noise Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply voltage (VCC+): 18 V
• Supply voltage (VCC-): -18 V
• Input current: ±10 m A
• Supply voltage (VCC+ to VCC-): 36 V
• Low Noise Voltage 4.5 nV/√Hz
• Large Output-Voltage Swing 14.1 V to
• Storage temperature range: –65°C to150 °C

5KP33 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 36.7V
• Maximum Breakdown voltage: 44.9V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 86A
• Maximum clamping voltage: 59.0V
• Power Dissipation: 5000W
• Package: R-6

P6KE9.1A 50µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:

• Minimum Breakdown voltage: 8.65V
• Maximum Breakdown voltage: 9.55V
• Maximum Reverse Leakage Current: 50µa
• Maximum peak pulse current: 45A
• Maximum clamping voltage: 13.4V
• Maximum Temperature Coefficient of VBR: 0.068%
• Power Dissipation: 600W
• Package : DO-15

A4988 Stepper Motor Driver SMD IC

Specification:-

• 3.3 and 5 V compatible logic supply
• Thermal shutdown circuitry
• Short-to-ground protection
• Shorted load protection
• Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16

P4KE82A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 77.9 , Max(V) 86.1
• Maximum peak current : 3.7A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41