ALL ELECTRONICS COMPONENTS

SMAJ48 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 53.30V
3. Maximum Breakdown voltage : 65.1V
4. Stand-off voltage : 48.0
5. Maximum reverse leakage current : 5.0µa
6. Maximum peak pulse current : 3.5A
7. Maximum clamping voltage : 85.5V
8. Power dissipation : 400W

BZT52C12S 200mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 200mW
• Nominal Zener Voltage : 12V
• Minimum Zener voltage : 11.4V
• Maximum Zener voltage : 12.7V
• Maximum Reverse Current : 0.1µa
• Package : SOD-323

SA28A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 31.1 , Max(V) 34.4
• Maximum peak current : 11.0A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P4KE82 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 73.8 , Max(V) 90.2
• Maximum peak current : 3.6A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

P4KE30A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 28.5 , Max(V) 31.5
• Maximum peak current : 10A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

SMA, SMAJ16, 16.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 16.0v
3. Maximum average rectified current : 10.4A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 28.8V

5KP10A 15µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 11.1V
• Maximum Breakdown voltage: 12.3V
• Maximum Reverse Leakage Current: 15µa
• Maximum peak pulse current: 294A
• Maximum clamping voltage: 17.0V
• Power Dissipation: 5000W
• Package: R-6

0.47uF 50V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 0.47uF
• Rated Voltage: 50V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

SMBJ150A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 167.00V
3. Maximum Breakdown voltage : 185V
4. Stand-off voltage : 150.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 2.5A
7. Maximum clamping voltage : 243.0V
8. Power dissipation : 600W

0.015μF 153J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 7.5mm
8. Dimensions of Length : 16.5mm

SMBJ11 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 12.2V
3. Maximum Breakdown voltage : 14.9V
4. Stand-off voltage : 11.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 29.9A
7. Maximum clamping voltage : 20.1V
8. Power dissipation : 600W

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C