ALL ELECTRONICS COMPONENTS

MM3ZB51 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 51V
• Minimum Zener voltage : 49.98V
• Maximum Zener voltage : 52.02V
• Maximum Reverse Current : 1.0µa
• Package : SOD-323

SMC(G) SMCJ24A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 24.0V
3. Maximum peak pulse current : 38.6A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 38.9V
6. Power dissipation : 1500W

SMA, SMAJ33, 33.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 33.0v
3. Maximum average rectified current : 5.1A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 59.0V

SMA, SMAJ13A, 13.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 13.0v
3. Maximum average rectified current : 14.0A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 21.5V

OP177 Ultra-Precision Operational Amplifier SMD IC

Specification:-

• IC Name: OP177 
• CMRR: 130 dB minimum
• PSRR: 115 dB minimum
• Low supply current 2.0 mA maximum
• Excellent open-loop gain and gain linearity – 12 V/μV typical

0.0056μF 562J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 17.0mm(W)
• Dimensions = 13.0mm(H)
• Dimensions = 8.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMC(G) SMCJ90A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 90.0V
3. Maximum peak pulse current : 10.3A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 146V
6. Power dissipation : 1500W

SMBJ43A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 47.80V
3. Maximum Breakdown voltage : 52.8V
4. Stand-off voltage : 43.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 8.6A
7. Maximum clamping voltage : 69.4V
8. Power dissipation : 600W

LF353 Wide Bandwidth Dual JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Rail-to-rail In to V+
• Low Input Bias Current 50 pA Typical
• Low Input Noise Current 0.01 pA/√Hz Typical
• Low Supply Current 3.6 mA Typical
• High Input Impedance 1012 Ω Typical
• Internally-Trimmed Offset Voltage
• Gain Bandwidth 3 MHz Typical
• High Slew Rate 13 V/µs Typical
• Storage temperature: 0 °C to 70 °C

Linear Slide Potentiometer 4x2mm Knob Red Color Fader Cap Pack of 5

Specification:-

• Color: Red 
• Knob Type: Slider
• Shaft Type: Shaft
• Easy to Install
• Shaft Fixing: Push-Fit
• Total Size: 23.5 × 11 × 10 mm

SA33A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 36.7 , Max(V) 40.6
• Maximum peak current : 9.4A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

SA14 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 15.6 , Max(V) 19.1
• Maximum peak current : 19.4A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15