ALL ELECTRONICS COMPONENTS

24C128 128K bit Serial I2C Bus EEPROM IC (DIP-8 Package)

Specification:-

• Voltage on Any Pin concerning Ground: -1.0V to +7.0V
• Storage temperature: -65°C to +150°C
• Operating Temperature: -55°C to +125°C
• Maximum Operating Voltage: 6.25V
• DC Output Current: 5.0 mA
• 1 MHz (5V), 400 kHz (2.7V, 2.5V) and 100 kHz (1.8V) Compatibility

5KP14 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 15.6V
• Maximum Breakdown voltage: 19.1V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 194A
• Maximum clamping voltage: 25.8V
• Power Dissipation: 5000W
• Package: R-6

74HC573 Octal D-Type Transparent Latch IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

74HC85 4-bit Magnitude Comparator SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500mW
• Supply Voltage range: -0.5 to 7.0V
• Operating Temperature: 65°C to 150°C
• DC Input Diode Current: ±20 mA
• DC Output Diode Current: ±20 mA

LF398 Sample and Hold Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: ±18 V
• Input voltage: ±18 V
• Power dissipation: 500 m W
• Operates from ±5-V to ±18-V Supplies
•  0.5-mV Typical Hold Step at Ch = 0.01 µF
• Logic-to-logic reference differential voltage: 7 to -30 V
• Storage temperature: -65 °C to 150 °C

P4KE22A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 20.9 , Max(V) 23.1
• Maximum peak current : 14A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

MM3ZB39 300mW ,SOD-323 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 300mW
• Nominal Zener Voltage : 39V
• Minimum Zener voltage : 38.22V
• Maximum Zener voltage : 39.78V
• Maximum Reverse Current : 2.0µa
• Package : SOD-323

18 Pin DIP IC Socket Base Power Supply Adaptor Pack of 5

Specification:-

• Power Source: DC
• Number of Pin: 18 Pin
• Contacts resistance: 10 mW
• Current rating: 1 A
• Protected open entry for easy insertion of IC
• Easy to insert and remove ICs

HER155 400V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 400V
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : DO-15

74LS93 5V 4Bit Binary Counter 14-Pin DIP

Specification:-

• Number of pins: 14
• 4-Bit Binary Counter IC
• Typical Operating Voltage: 5V
• Operating Voltage Range: 4.5V to 5.5V
• Output High Voltage: 3.5V
• Output Low Voltage: 0.25V
• Output current when high: -0.4mA
• Output current when low: 8mA

SMC(G) SMCJ7.0 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 7.0V
3. Maximum peak pulse current : 112.8A
4. Maxim reverse current : 200µA
5. Maximum clamping voltage : 13.3V
6. Power dissipation : 1500W

SMC(G) SMCJ54A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 54.0V
3. Maximum peak pulse current : 17.2A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 87.1V
6. Power dissipation : 1500W