ALL ELECTRONICS COMPONENTS

LM3914 Logarithmic LED dot or bar display driver 18 pins IC pack of 50pcs

Specification

1. Analog controlled LED Driver IC
2. Number of controllable LEDs : 10
3. Operating voltage :  3V to 18V
4. Input analog voltage range : 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display mode available

SC608N B10K 90mm Single channel linear slide potentiometer pack of 1pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 90mm
4. Travel length : 74mm
5. Power rating : 0.25W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

A966 Bipolar PNP transistor pack of 20pcs

Specifications:-

1. Transistor type:  bipolar PNP transistor
2. Collector-Emitter Voltage:  -30V
3. Collector-Base Voltage:  -30V
4. Emitter-Base Voltage:  -5V
5. Collector Current:  -1.5A
6. Collector Dissipation:   -0.9W
7. DC Current Gain:  - 100 to 320
8. Transition Frequency:  - 120MHz

KBP, KBP310 3A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBP
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 80A
6. Maxim forward voltage : 1.1V

1.5μF 155J 400V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V 
2. Dimensions = 30.0mm(W)
3. Dimensions = 19.0mm(H)
4. Dimensions = 10.0mm(T)
5. Dimensions = 25.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 15000M Ω

27mm Diameter Piezoelectric Sensor Plate with Wire

Specification:-

• Impedance value:  ≤500Ω.
• Size if diameter: 27mm
• Low soldering temperature.
• Strain sensitivity:  5V/µƐ
• Converts Mechanical Force Into Electrical Output

A42 Bipolar NPN transistor pack of 20pcs

Specification:-

1. Transistor type:  Bipolar NPN Transistor
2. DC Current Gain:  40
3. Continuous Collector Current:  500mA
4. Base- Emitter Voltage:  6V
5. Collector-Emitter Voltage:  300V

2cm x 2.3cm Aluminium heatsink for power transistor pack of 5pcs

Product overview:-

• 100% Branded, New, and High-quality product
• Product Name : Aluminium Heatsink for Power transistor
• The material used : Aluminum
• Color : Silver Tone
• Overall Size : 2cm x 2.3cm x 1cm (L*W*H)

33uf / 400V Aluminum Electrolytic Capacitors (16 X 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 16 X 25mm
4. Voltage Rating :  400V
5. Capacitance: 33uf
6. Capacitance tolerance : ±20%(M)

20 Pcs 2.2 Ohm (Ω) 1 Watt ±5% Tolerance 2.2 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:-

1. Resistance : 2.2 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 1W
5. Max. operating voltage : 180V to 240V

TL494 Pulse Width Modulation Controlle IC

Specification:-

• Supply Voltage (VCC): 41V
• Amplifier input voltage: VCC+0.3V
• Collector output voltage: 41V
• Collector output current: 250 mA
• Lead temperature 1,6 mm: 260°C
• Storage Temperature: 65 °C to +150°C

2902N Single supply quad operational amplifier DIP 14 pin IC pack of 2pcs

Specification

1. Single supply
2. High output voltage
3. Supply voltage:  16V to 32V
4. Power dissipation: 300mW
5. Number of pins: 14
6. Slew rate: 0.5V/μs
7. low operating voltage: 1mA