ALL ELECTRONICS COMPONENTS

AS-10 220V 10A Automatic On Off Light Based photocell Sensor Switch for lighting

Specification:-

• Model : AS-10
• Input Voltage :DC/AC 12V 24V 220V Optional
• Max Load Current : 10A
• Frequency : 50-60HZ
• Easy to install

120V AC to 24V DC 2A 6 Terminal LT2S-12VDC-T Subminiature DPDT PCB panel mount power relay pack of 5pcs

Specifications

1. Operating voltage : 12V to 24V DC
2. Maximum voltage : 120V AC
3. Max. operating voltage : 2A
4. Supply current : 0.2A
5. 2 Form C configuration.
6. Bifurcated contacts.
7. Epoxy-sealed.

TM1628 Digital LED display driver 28 pins IC pack of 10pcs

Specification

1. Advance technology
2. Supply voltage : 5V to 7V
3. Logic input voltage : -0.5 to VD D + 0.5
4. Logic supply voltage : 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

KA431AZ Programmable shunt regulator transistors pack of 100pcs

Specification:-

1. Transistor type:  Programmable shunt regulator transistor
2. Programmable Output Voltage:  2.5V to 36V
3. Dynamic Output Impedance:  0.2
4. Current Capability:  1.0 to 100 mA
5. Low Output Noise Voltage
6. Fast Turn−on Response

6 x 4 inch (15.3cm x 10.3cm) High quality Copper clad single side 1mm pitch printed circuit board or PCB pack of 5pcs

Specification:

• Copper-clad coating PCB
• Dimension : 6 x 4 inch (15.3cm x 10.3cm)
• Board thickness : 1mm
• Pitch size : 1 mm
• Circuit printing : single side
• High wear and tear properties
• Excellent heat resistance

1000uf / 250V Aluminum Electrolytic Capacitors (30 x 45)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 30 x 45mm
4. Voltage Rating :  250V
5. Capacitance: 1000uf
6. Capacitance tolerance : ±20%(M)

TO-220 7808, 3-Terminal Positive Voltage Regulator IC pack of 5pcs

Specification

1. Output Current Up To 1.5 A
2. Input Voltage 7.7V To8.3V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection

50Pcs 220K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 220K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

4700uf / 35V Aluminum Electrolytic Capacitors (35 X 35)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 35 X 35mm
4. Voltage Rating :  35V
5. Capacitance: 4700uf
6. Capacitance tolerance : ±20%(M)

PIC18F2550 High-Performance enhanced flash USB Microcontroller with Nano watt technology DIP 28 pin IC

Specification

1. Operating supply voltage: 4.2V to 5.5V
2. Number of ADC units: 1
3. Timer resolution: 8bit and 16bit
4. Program memory type: flash
5. Ram size: 2.048kb
6. CPU speed: 12MIPS
7. Communication interface: serial

100K ohm ( Ω ) multi turn trimpot variable resistor 3296W-1-104LF pack of 5pcs

Specifications

1. Type                              : multi turn variable resistor
2. Resistance value        : 100K Ω
3. Tolerance                    : ±10 %
4. Temperature Range  : -55 °C to +125 °C
5. Rotational Life           : 200 cycles

CD4052 4 Channel multiplexer and demultiplexer DIP 16 pins IC pack of 10pcs

Specification

1. Nominal voltage: 5V to 15V
2. Maximum operating voltage: 20V
3. Propagation delay: 400ns at 5V
4. Supports both analog and a digital voltage
5. 4:1 Multiplexer IC
6. 1:4 Demultiplexer IC