ALL ELECTRONICS COMPONENTS

1N5819 25A 600V Forward voltage diode pack of 50pcs

Features:-

• The average forward current is 1A
• Forward Surge Current is 25A
• Forward Voltage Drop 600mV at 1A
• The peak reverse voltage is 40V
• RMS Reverse Voltage is 28V

UC3843AN PWM current mode controller DIP 8 pins IC pack of 10pcs

Specification

1. PWM controller
2. Operating Voltage :  7V to 8V
3. Output pin current :  1A
4. Analog input range  :  -0.3V to 6.3V
5. Oscillation Frequency :  52 approx.
6. Gain value  :  3V
7. Maximum source current :  22mA

7.5cm X 5cm Multi Purpose single Side Strip Prototyping Printed Circuit PCB Board

Specification

• Item size: 7.5cm x 5cm.
• Good quality and Suitable to use.
• Phenolic General Purpose PCB.
• Quick solution for your circuit prototype.

0.33μF 334J 630V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage: 630V
2. Dimensions = 25.0mm(W)
3. Dimensions = 18.0mm(H)
4. Dimensions = 12.0mm(T)
5. Dimensions = 21.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

LM3914 Logarithmic LED dot or bar display driver 18 pins IC pack of 10pcs

Specification

1. Analog-controlled LED Driver IC
2. Number of controllable LEDs: 10
3. Operating voltage:  3V to 18V
4. Input analog voltage range: 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display modes are available

TEA2025 Stereo audio power amplifier 16 pins IC pack of 50pcs

Specification

1. Dual or bridge connection modes
2. Supply voltage:  3V to 15V
3. Output peak current : 1.5A
4. Voltage gain : 47dB
5. High channel separation
6. Very low switch-on/off the noise
7. Thermal shutdown and short circuit protection

6Ω (ohm) 10W Rectangle Shape LED TV Bass Internal Speakers Part (90mm x 15mm)

Specification:-

• Dimensions of speaker: 90mm x 15mm
• Impedance value: 6Ω (ohm)
• Power rating: 10W
• Shape: Rectangle
• New and advanced design
• High-quality audio output

25 ohm ( Ω ) 10 watts Fusible ceramic cement power resistors pack of 250pcs

Specifications

1. Resistance : 25 ohm (Ω)
2. Tolerance : 5%
3. Resistor type : fusible ceramic cement power resistor
4. Power rating : 10W
5. Can withstand in high-energy and high-voltages at high temperatures
6. Reliable and offers a long service life

DO-15, R4000 4000V High Voltage Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 4000v
2. Maximum average rectified current : 0.2A
3. Maxim reverse current : 5.0µA
4. Case :  DO-15
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 5.0V

AH49E Hall effect sensor pack of 2pcs

Specification

1. Power Consumption  :  3.5mA
2. Energy Efficient
3. Single Current Sourcing Output
4. Stable and Accurate Output
5. Temperature Range  :   -40oC to 85oC
6. Package includes : 2 pieces

6 x 4 inch (15.3cm x 10.3cm) Copper clad single side 1mm pitch printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 6 x 4 inch (15.3cm x 10.3cm)
3. Board thickness : 1 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

24MHz Electronic quartz crystal oscillator KDS24.000 through hole 2 pins pack of 20pcs

Specification:-

1. High-quality product
2. Load Capacitance  :  18pF
3. Frequency Tolerance  :  30ppm
4. Frequency Temperature Stability  :  20ppm
5. Resonance Resistance  :  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift