ALL ELECTRONICS COMPONENTS

6800uf / 25V Aluminum Electrolytic Capacitors (18 X 35.5)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 18 X 35.5mm
4. Voltage Rating :  25V
5. Capacitance: 6800uf
6. Capacitance tolerance : ±20%(M)

SC458G A10K 75mm Dual channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type : slide
2. Maximum resistance : 10KΩ
3. Total length of the pot : 75mm
4. Travel length : 60mm
5. Power rating : 0.5W
6. Element material : carbon
7. Actuator type : Lever
8. Tolerance : 20%

5cm x 7cm Copper Clad Coating PCB Universal PCB Prototype Board for DIY Soldering, pack of 5

specification

1. Copper clad coating PCB
2. Dimension : 5cm x 7cm
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. High wear and tear properties
6. Excellent heat resistance

KK 2.1.5 Multi-Rotor LCD Flight Controller Board

Specification:-

• Gyro/Acc: 6050MPU
• IC: Atmega644 PA
• Input Voltage: 4.8V-6.0V
• AVR Interface: 6 Pin
• Signal From Receiver: 1520us(5 channels)

TOP244YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC : 85V to 265V
2. Switching frequency : 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 2.16A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

Light dependent resistors sensors 12 mm (LDR) GL12528 pack of 50pcs

Specification

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 50 pieces

4 x 4 inch (10.3cm x 10.3cm) Copper clad single side 1mm pitch printed circuit board or PCB pack of 1pcs

Specification

1. Copper clad coating PCB
2. Dimension : 4 x 4 inch (10.3cm x 10.3cm)
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

1.0μF 105J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V 
2. Dimensions: = 25.0mm(W)
3. Dimensions = 13.5mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = ≥ 1250S Ω

180uf / 400V Aluminum Electrolytic Capacitors (35 x 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 35 x 25mm
4. Voltage Rating :  400V
5. Capacitance: 180uf
6. Capacitance tolerance : ±20%(M)

1.0μF 105K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.2mm(W)
3. Dimensions = 11.0mm(H)
4. Dimensions = 7.5mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

SG3525A Pulse width modulation controller DIP 16 pins IC pack of 50pcs

Specification

1. Type : Pulse width modulation controller
2. Supply voltage :  8V to 35V
3. Frequency range : 100 to 400 KHz
4. Max. power dissipation :  1000mW
5. Pulse shutdown capability
6. External oscillator synchronization pin

2N2222 General purpose NPN transistor packs of 100pcs

Specifications:

• Transistor Type  :  Bipolar high current NPN Transistor
• DC Current Gain  :  100
• Continuous Collector current  :  800mA
• Emitter Base Voltage  :  6V
• Collector Emitter Voltage  :  30V
• Base Current  :  5mA