NEW ARRIVALS

12V 16.6A 200W SMPS LED Driver Power Supply | AC 175–265V to 12V DC Converter

Specification:-

1. Output Voltage: 12V
2. Output Current: 16.6A 
3. Output Power: 200W
4. Input Voltage: 175V/265V AC
5. Frequency: 50/60Hz
6. IP Level-Waterproof

Super Starter UNO R4 Minima Kit | DIY Electronics & Robotics Kit for Beginners to Advanced Users (105 Item)

Specification:-

• Compatible with UNO R4 Minima Board
• Fully supports Arduino IDE programming environment
• Includes a wide range of electronic components, sensors, and modules
• Plug-and-play breadboard for easy prototyping without soldering
• Durable and reusable components for multiple projects
• Suitable for beginners, hobbyists, and intermediate learners

Kit Included:
1x Compatible R4-Lite Minima Board | 1x Type-C Cable | 1x 830 Point Breadboard | 1x Servo Motor | 40x Male-to-Male & Male-to-Female Jumper Wires | 1x 0.96 inch OLED Display | 1x Photoresistor (LDR) | 1x DHT11 Temperature & Humidity Sensor | 1x Potentiometer 10K | 30x Resistor Pack – 220Ω, 1KΩ, 10KΩ | 1x Active Buzzer | 1x Passive Buzzer | 1x Ultrasonic Sensor (HC-SR04) | 6x Push Switch with caps | 1x RGB LED Module | 15x LEDs (Red, Green, Yellow) 1x Tilt Sensor | 1x IR Sensor | 1x Flame Sensor

9V 1.2A Power Adapter 5.5x2.5mm Plug Compatible with TP-Link Router

Specification: 

1. Input voltage : 150V to 285V AC
2. Connector Size: 5.5mm x 2.5mm (Male Plug)
3. Output voltage : 9V
4. Power rating : 1.2A
5. Max. frequency range : 50 to 60 Hz
6. Model no: SSP-091
7. High-quality adapter with the latest and advanced technology

13.56MHz RFID Tag with Black Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32-bit Unique ID
• Color: Black
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

3-in-1 Servo Motor Kit with SG90 Micro Servo | Digital Servo Tester | AA 4 Cell Battery Holder

Specification:-

• Digital Multi Servo Tester
• Operating Voltage: DC 4.8-6V
• AA 4 cells Battery holder
• Type : AA battery holder
• Output current : 6V
• SG90 Servo Motor
• Operating voltage:  3V to 7.2V
• Recommended voltage: 5V
• Stall torque : 1.2 kg/cm (4.8V)
• Max stall torque : 1.6 kg/cm (6V)
• The operating speed is 0.1s/60° (4.8V)
• Rotation: 0°-180°

46-in-1 DIY Sensor Kit (37-in-1 + Extra Modules) | Compatible with Arduino IDE & Raspberry Pi

Specification:-

• Modules Included: 46 modules (37-in-1 sensor kit + 9 additional modules)
• Durability: High-quality, reusable modules designed for long-term experimentation
• Hall effect detection sensor (easily available)
• Joystick sensor Input voltage range: 3.3V to 5V
• Suitable for Arduino, AVR, and PIC microcontroller projects
• The sensor module kit is perfect for various DIY projects and robotics science projects
• Programming Support: Fully supports Arduino IDE, Python, and Scratch-based coding platforms

Package includes:
1x Real time clock | 1x Joystick | 1x 5v relay | 1x Big sound | 1x Small sound | 1x Tracking | 1x Avoidance | 1x Water sensor | 1x Flame sensor | 1x Linear hall | 1x Touch sensor | 1x Digital temperature | 1x Active buzzer | 1x Passive buzzer | 1x  rgb | 1x Ultrasonic sensor | 1x Two color led | 1x Mini two color led | 1x Reed | 1x Mini reed | 1x Mpu 6050 | 1x Heartbeat | 1x 7 Color led | 1x Mp1584en | 1x Push button | 1x Shock sensor | 1x Rotatory encoder | 1x Light cup | 1xTilt switch | 1x Ball switch | 1x Photo resistor | 1x Gas sensor | 1x Analog hall | 1x Magnetic hall | 1x Temp 18b20 | 1x Analog temp | 1x IR Receiver | 1x Light blocking | 1x Sd card reader | 1x IR emitter | 1x Temp and humidity | 1x Laser emitter | 1x Smd rgb | 1x Soil moisture sensor | 1x Tap module | 1x Breadboard power supply.

Mini WiFi Smart Switch Module | 16A | AC 100–240V | App & Voice Control Ready

Specification:

• Product Type: Mini WiFi Smart Switch Module
• WiFi Standard: IEEE 802.11 b/g/n
• Operating Frequency: 2.4 GHz
• Input Voltage: AC 100–240V, 50/60Hz
• Output Voltage: AC 100–240V, 50/60Hz
• Maximum Current: 16A
• Control Type: WiFi App Control
• Switch Type: Single Channel

0.25M Type-C to USB Fast Charging Cable 65W 3.1A, Red TPE Short Cable

Specification:

1. Type C Cable
2. Total length: Approx. 0.25 Meter
3. Material: TPE soft wire
4. Current Rating: 3.1A
5. Charging Power: Up to 65W
6. Fast Charging
7. Long-Lasting Performance
8. High-speed data transfer

Male-Female Extension Wall Cord Cable | 3-Pin 3-Meter PVC | Suitable for Computers

Specification:

• Type: 3-Pin Male-Female Extension Cable
• Voltage Rating: 220–250V AC
• Cable Length: 3 Meters
• Color: White
• Material: High-grade PVC
• Connector Gender: Male-to-Female

Male-Female Extension Wall Cord Cable | 3-Pin 5-Meter PVC | Suitable for Computers

Specification:-

1. Type: 3-Pin Male-Female Extension Cable
2. Voltage Rating: 220–250V AC
3. Cable Length: 5 Meters
4. Color: White
5. Material: High-grade PVC
6. Connector Gender: Male-to-Female

Electronic Sensors Kit with DIY Projects Controller Board, RFID, Ultrasonic, IR, Smoke Components (95 Item)

Specifications:-

• 400 points Half size Solderless breadboard
• UNO R3 AVR USB Development board
• 6V - 12V DC Mini underwater pump
• Humidity Detection Moisture Sensor
• 16 x 2 Yellow/Green color LCD display
• RC522 RFID Card Reader Module
• Flammable gas and smoke detection sensor
• IR Proximity Sensor for Line Follower
  

Component List: 1 Pcs Controller Board, 1 Pcs Breadboard, 1 Pcs 4X4 16 Matrix Membrane Keypad, 1 Pcs USB cable, 1 Pcs Ultrasonic Sensor, 1 Pcs IR Proximity Module 1 Pcs DHT-11 Sensor, 1 Pcs MQ-2 smoke detection sensor module, 1 Pcs RC522 RFID Card Reader Module, 1 Pcs 16x2 LCD, 1 Pcs Soil Hygrometer Humidity, 1 Pcs mini water Pump, 5 pieces each of red, green, and white LEDs, 1 Pcs RGB LED, 10 Pcs Resistor (100K), 1 piece of 9V battery, 2 Pcs 100K ohm vertical preset variable resistors, 1 piece of 1-digit 7-segment Display 1 Pcs Buzzer, 2 Pcs push button switch (12x12x7), 4 Pcs NPN transistor (BC547), 2 Pcs rectifier diodes (1N4007 ), 1 Pcs light-dependent resistor (GL5528), 1 Pcs 9V battery connector, 40 Jumper wires (Male to Female, Male to Male)

Super Mega 2560 Starter Kit | Complete Beginner’s Learning Kit Compatible with Arduino IDE (136 Item)

Specification:-

• MEGA2560 MCU REV3 development board
• 5mm round shape LED 
• SG90 Servo Motor
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• 12x12x7.3 mm Push Button Switch with Cap 
•  Yellow/Green LCD display module

Kit Included: 1 pcs Aadruino Mega 2560 Board | 1 pcs Mega 2560 Shield | 1 pcs Remote (IR Remote Control) | 1 pcs 1602 LCD Display | 1 pcs 830 Points Breadboard | 1 pcs 40 Pin Header | 1 pcs Potentiometer | 30 pcs LED (Red, Green, Blue) | 1 pcs USB Cable | 20 pcs Jumper Wires (Male to Male) | 20 pcs Jumper Wires (Female to Male) | 1 pcs 9V Battery Supply Connector | 4 pcs Push Button with Caps (Colored) | 1 pcs Stepper Motor with Driver | 1 pcs Mini Breadboard | 1 pcs Servo Motor (SG90 9G) | 1 pcs Active Buzzer | 1 pcs Passive Buzzer | 1 pcs 4-Digit 7 Segment Display | 1 pcs 1-Digit 7 Segment Display | 1 pcs IC 74HC595 | 1 pcs Flame Sensor | 1 pcs Photoresistor (LDR Sensor) | 1 pcs NPN Transistor | 1 pcs IR Receiver Module | 1 pcs Vibration Sensor / Tilt Sensor | 40 pcs Resistors – (1K, 10K, 220Ω, 330Ω)