NEW ARRIVALS

1.5meter Black HDMI Male to Female Extension Cable for LED/LCD TV, Laptop

Specification:-

1. High performance
2. Colour : Black
3. Travel Friendly
4. Connector Type: HDMI
5. Input Connector: 1 x HDMI Male
6. Output Connectors: 2 x HDMI Female
7. Resolution Support: Up to 1080p (Full HD)
8. Size: 1.5 Meter (approx)

13.56MHz RFID Tag with Red Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Red 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

Combo of Wire Crimp Connector Assorted Kit | Ring, Spade, Fork, Butt, Male & Female Connectors (280 Pcs)

Specification:-

• Product Type: Assorted Wire Connector Kit
• Material: Copper + PVC Insulation
• Total Pieces: 280 pcs
• Connector Types: Ring, Spade, Fork, Butt, Male, Female
• Color Code: Red (22–16 AWG), Blue (16–14 AWG), Yellow (12–10 AWG)
• Package Type: Compartmentalized plastic storage box

C-Type USB Female Socket with 2-Pin 2.5mm JST Wire Connector (25.5cm)

Specification:-

• Connector Type: USB
• Cable Type: USB
• Current: 3A
• Wire length: approx. 25.5 cm
• 2-Pin 2.5mm JST Connector
• Compatible Devices: Charging Adapter

13.56MHz RFID Tag with Yellow Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Yellow 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Green Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Green 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

13.56MHz RFID Tag with Multicolor Keychain for Access Control (2 pcs each)

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Multicolor 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

12V 2A Adapter with 5.5mm Female BNC Connector, Ideal for CCTV & LED DIY Projects

Specification:

1. Input voltage: AC 100–240V
2. Output voltage: 12V
3. Power rating: 2A
4. Color: Black
5. Max. frequency range: 50 to 60 Hz
6. Over-current, overload, and short circuit protection
7. Type: Power Connector
8. Connector Type - 5.5mm Female BNC Screw-Type Connector

B50k Ohm 5-pin Composition Rotary Taper Potentiometer Green/Silver Tone

Specification:-

• Type: Single Linear (Type B)
• Mounting Style: Through Hole
• PIN numbers: 5
• Shaft Diameter: 6 mm
• Shaft Length: 14 mm
• Resistance value: B50K Ohm
• Color: Green, Silver Tone

FT232RL FTDI USB to Serial Adapter Module | USB to TTL Programming Converter for DIY Projects

Specification:-

• Chipset: FT232RL
• Input Interface: USB
• Output Interface: TTL UART (TX, RX, GND, VCC)
• Operating Voltage: 5V via USB
• Logic Level: 3.3V / 5V selectable
• Data Transfer Rate: Up to 3 Mbps
• Connector Type: USB Type-A / Micro-USB (model dependent)
• Operating System Support: Windows, Linux, Mac OS

12V 2.4W Cool White COB LED | Cars Interior Lights | Universal Car Roof & Cabin Lights Pack of 20

Specification:

• Operating voltage: 12V
• Emerging color: White
• Power rating: 2.4 watts
• LED junction temperature: 125°C
• Color Temperature: 6500K
• Low Battery Consumption

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)