AMPLIFIER MODULES

TPA3116 Dual channel stereo 2 x 50W audio amplifier circuit modules pack of 50pcs

Specification

1. Dual channel
2. Output power:  50W+50W
3. New filter less design
4. Excellent sound quality
5. Operating voltage  :  12V to 24V
6. Current handling capacity  :  3A
7. IC name  :  TPA3116
8. Can easily drive small speakers

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 10pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

12V Bluetooth MP3 USB charging port FM radio player and decoder modules with Remote pack of 50pcs

Specification

1. Working voltage:  12V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card/USB charging
3. Excellent sound quality
4. Supports USB cable for charging purposes
5. Cheap and easy to install
6. Remote for easy handling

Bluetooth MP3 USB FM radio player and decoder modules with Remote pack of 50pcs

Specification

1. Working voltage:  5V
2. Support:  mp3/Bluetooth/USB/aux/FM/memory card
3. Excellent sound quality
4. Convenient
5. Cheap and easy to install
6. Remote for easy handling

MP3-TF-16P MP3 Disk TF Card Module With Serial Port Pack of 1

Specification

1. Support Mp3 and WMV decoding
2. Input supply voltage:  3.2V-5V
3. DAC output  :  24 bit
4. SNR support  :  85db
5. Fully supports FAT16, FAT32 file system
6. Max. supportable card  :   32G TF card
7. Supports sampling rates (kHz)  :  8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48.

PAM8403 3W Dual track red mini digital power amplifier

Specifications

1. Input voltage : 2.5V to 5.5V
2. Output impedance : 4 ohm (Ω)
3. Efficiency : 90%
4. Frequency response : 150 Hz – 20 kHz.
5. Input impedance : 2 Kohm

TPA3118 60W Mono (single) channel digital power amplifier modules pack of 50pcs

Specification

1. Operating Voltage:  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 50pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

12V -24V Bass Treble Amplifier Board

Specification:-

• Voltage Range: 12V to 24V DC
• Bass Control: Adjusts low-frequency sounds.
• Treble Control: Adjusts high-frequency sounds.
• Input/Output:
• Input: Often supports 3.5mm AUX or RCA connections for audio sources.
• Output: Connects to speaker terminals for left/right channels.

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

C-Type 2 Channel BT5.0 Stereo Audio Amplifier 3.7-5V MP3 Audio Receiver Module

Specification:-

• Maximum Supply Voltage: 5 Volts
• Minimum Supply Voltage: 3.7 Volts
• Dimensions: 30 x 30 x 1.5 mm
• Support profile: A2DP, AVCTP, AVDTP, HFP
• BT5.0-Audio: Genuine 5.0 Blue tooth audio decoding chip