SENSORS & MODULES

TG113 Bluetooth speaker circuit board module pack of 1pcs

Specification

1. New and improve microchip technology
2. Working voltage  :  3.7V-5V DC
3. Inbuilt sound sensor or mic for recording purposes
4. Support  :  mp3/bluetooth/USB/aux/FM
5. Push buttons for easy handling
6. Excellent sound quality
7. Widely use in portable speakers
8. Can drive a normal speaker directly

Bluetooth MP3 USB FM radio player and decoder module with Remote pack of 1pcs

Specification

• Working voltage  :  5V
• Support  :  mp3/bluetooth/USB/aux/FM/memory card
• Excellent sound quality
• Convenient
• Cheap and easy to install
• Remote for easy handling

5V wireless HI-FI USB/ FM / 5 watt + 5 watt Audio Amplifier Bluetooth Player Module MP3 with in- Built mic

Specification

1. Support:  mp3/Bluetooth/USB/aux/FM/memory card
2. Excellent sound quality
3. Remote for easy handling
4. Can connect speakers directly
5. MODE: Switching of USB/TF/FM/LINE IN/BLUE TOOTH
6. USB: Connect the USB flash drive 
7. In Build Amplifier Module
8. Working voltage    5V
9. output current: 5 watt

Bluetooth MP3 USB FM radio player module with double direct speaker connection pack of 1pcs

Specification

1. Working voltage  :  5V
2. You can connect two speakers of 5 watt directly
3. 3 pre-install buttons for easy handling
4. Support  :  mp3/bluetooth/USB/aux/FM/memory card/USB charging
5. Excellent sound quality
6. Cheap and easy to install

TP4056 Micro USB 5V 1A Lithium battery charging module (b-type) pack of 1pcs

Specifications:-

1. Input supply voltage  ：-0.3V to 8V
2. Short-Circuit Duration  ：Continuous
3. BAT Pin Current  ：1200mA
4. PROG Pin Current  :  1200uA

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier module pack of 1pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power  :  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

TPA3110 XH-A232 30W + 30W Dual Channel digital stereo audio power amplifier module pack of 1pcs

Specification:-

1. operating range: 12 to 24 volts
2. Output Power: Dual Channel, 30W+30W
3. IC code: TPA3110.
4. Impedance of the output: 4 to 8 ohm ()
5. More than 3A in supply current

Decoder Board Audio Wireless Bluetooth Module for amplifier Bluetooth USB/ AUX/ TF card (70x45)mm

Specification

1. Connector Type          Bluetooth
2. Control Method          Remote
3. Audio Output Type     Speakers
4. Dimension                  70 x 45 mm
5. Material                      Plastic
6. voltage rating             5 V

Wireless Mic with ON-OFF switch and Wireless receiver circuit module

Specifications:-

1. 100% Original and tested product
2. Operating voltage : 5V
3. Replaceable two AA batteries
4. Sound capture range : 2 meter (approx)
5. Frequency responce : 10Hz to 100Hz

12V Bluetooth MP3 USB charging port FM radio player and decoder module with Remote pack of 1pcs

Specification

1. Working voltage  :  12V
2. Support  :  mp3/bluetooth/USB/aux/FM/memory card/USB charging
3. Excellent sound quality
4. Supports USB cable for charging purposes
5. Cheap and easy to install
6. Remote for easy handling

Wireless HI-FI Bluetooth MP3 USB FM player module with remote, stereo, volume, bass and treble control complete amplifier system

Specification

1. Working voltage  :  12V DC
2. Speaker Watt: 40W +40W
3. Support  :  mp3/bluetooth/USB/aux/FM/memory card
4. Excellent sound quality
5. Can connect speakers directly
6. Cheap and easy to install
7. Remote for easy handling

KCX BT002 bluetooth 4.2 Wireless stereo audio receiver circuit module pack of 1pcs

Specification:-

1. Working voltage  :  Dc 3.3V to 5.0 V
2. Provide good sound quality
3. Easy to set up with other amplifiers
4. Very low power consumption
5. Very small size