THE GREAT COMBO'S

Combo of Electronic Projects Starter Learning Kit for little engineers In one Box, Mini Bulb Holder Project

Specification:-

• Understand the basic principles of electricity and circuits.
• Learn how to assemble and connect electronic components.
• Explore the function of switches and how they control the flow of electricity.
• Gain experience with hands-on experimentation and problem-solving.
• Develop creativity and innovation skills through project-based learning.

 Package includes:- 1 battery base, 1 air blade, 1 small light bulb, 1 base, 1 battery, 2 alligator clips, 1 switch, 1 10cm line, 1 nail, 1 copper wire, 3 paper clip

Combo of 6-in-1 Tool Kit – Plier | Screwdriver | Tester | Wire Cutter | Hammer & Tape

Specifications:

1. 100% Branded and high-quality products
2. 6 in one set for many applications
3. The total length of the plier: 8 inches (200mm)
4. High-quality stainless steel manufacturing products
5. Anti-rust and anti-corrosion properties
6. Highly insulated handles

kit - 1 pcs 8-inch plier, 1 pcs 175mm Screwdriver, 1 pcs 115mm Tester, 1 pcs Wire cutter, 1 pcs Tape, and 1 pcs 13-inch claw hammer

COMBO of 2 DC Pump, 2 Meter Pipe, 2 SPST Switch, 2 Battery Clip and Two 9V Batteries

Specification

• The Ceramic case protects the motor from damage
• Underwater pump & Pipe
• 100% Original and best quality product
• SPST red color plastic rocker switch
• 9V battery clip connector

Combo of DIY Science Project Kit for Kids | DC Motor | Battery | Clip & Fan (40 Items)

Specification:-

• High-performance battery
• Nominal voltage : 9V
• Non-rechargeable
• Working voltage : 9V
• Power rating : 1A
• Length of the wire : 6cm
• DC Motor: Rated Voltage: 4V 
• Item Type: Mini Electric Moto
• DC motor has strong power

Package Included:-  10 Pcs 9V Toy Battery, 10 Pcs Battery Clip Connector, 10 Pcs DC 4V Motor, 3 Pcs Yellow 4 Blade Fan, 3 Pcs Green 4 Blade Fan, 4 Pcs Red 4 Blade Fan

Combo of Mini Bulb Holder and Battery Holder kit for DIY Science Project

Specification:-

• Mini Bulb Holder
• User-Friendly Design
• 2-pin rocker switch
• AA battery holder
• Miniature screw-base light bulb
• Suitable for a variety of DIY science projects

Package Included: 1Pcs Toy Bulb Holder, 1Pcs Toy Bulb, 1Meter of connecting wires, pcs Rocker Switch, 1Pcs AA 2 cell battery holder 

Combo of Advanced Starter Kit Compatible with Arduino Projects with Instruction (245 Item)

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• 40 pin Jumper Wire
• 5V Piezoelectric Buzzer
• Blue color USB Cable
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module
• 3.3V-5v Joystick Sensor Module 

Package Included:- 1 Pcs LCD 1602 Module, 1 Pcs Breadboard Expansion Board, 1 Pcs matrix keyboard module, 1 Pcs 830 tie points Breadboard, 1 Pcs Ultrasonic Sensor, 1 Pcs Servo Motor, 2 Pcs potentiometer (10K), 1 Pcs DHT-11 (Temperature and Humidity Sensor), 1 Pcs 5V 1AMP Power supply Adapter, 1 Pcs Touch Sensor, 1 Pcs 5vlt Relay, 1 Pcs Power supply Module, 1 Pcs Joystick Module, 1 Pcs ULN2003 Stepper Motor Driver Board, 1 Pcs IC 74HC595, 1 Pcs 4 Digit 7 segment Display, 1 Pcs 7 segment display, 1 Pcs Stepper motor, 1 Pcs Active Buzzer, 1 Pcs Passive Buzzer, 5 Pcs Small button switch, 1 Pcs Tilt switch, 2 Pcs 2N2222 transistors, 1 Pcs IR receiver, 1 Pcs RGB LED, 2 Pcs Photoresistor, 1 Pcs Thermistor, 2 Pcs Diode Rectifier, 1 Pcs fan with motor, ,1 Pcs USB cable, 1 Pcs IR remote control, 1 Pcs Development Board, 40 pin jumper wire (Male to Male, Male to Female) 40 pcs each, LED (Green, Blue, Red, White, Yellow) 5 pcs each Resistor (10k, 1k, 220Ω, 100Ω, 100KΩ, 10R, 2KΩ, 5.1KΩ, 1MΩ, 330Ω) 10 pcs each 

Combo of White Heat Shrink Tubes | 1mm to 10mm | for Wire Insulation (1 mtr each)

Specification:- 

• Shrink ratio: 2:1
• Very easy to install
• High flexibility
• Color of the tube: White 
• Shrinking temperature: 90°C
• Operating temperature: 50°C to 125°C

Kit includes: 10mtr-1mtr Each - Pack (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)

Combo of Multicolor Jumper Wire Cable (Male To Male, Female To Female, Male To Female)-(20pcs Each)

Specification:-

• Jumper cable length : 200 mm
• Flexible wire design
• High-Quality Material
• Male to Male, Female to Female, Male to Female
• Long-lasting performance in various electronic projects.

5.5mm Male plug and Female jack 3 pin PCB Panel mount DC power connector pack of 10pair

Specifications:

1. Working voltage: 6V to 30V
2. Power rating: 1A
3. Size: 3.5mm both
4. Contacting material: High-quality Copper
5. Highly insulated for short circuit protection

Combo of Electronics DIY Kit | 5V Relay | Mini Water Pump | Proximity Sensor | Jumper Wires (48 Items)

Specification:-

• Power Source: DC
• Material: Polyvinyl Chloride
• Power current:  1.9A
• Working voltage:  6V to 12V
• Digital output : logic one (+3.5V DC) logic zero (0V DC)
• Distance measuring range : 2cm to 30cm
• Effective distance range : 2cm to 80 cm
• Number of channels: 1
•  Supply voltage: 3.75V to 6V
• Current when the relay is active: 70m

Package Included:-  2 Pcs 9V Battery, 2 Pcs Battery Clip Connector, 1 Pcs 5V Relay Module, 40 Pcs Female to Female Jumper Wire, 1 Pcs DC Mini Motor Pump with 1M Tubing, 1 Proxmity Sensor

Combo of Motor PWM Speed Controller with Adjustable Switch | Screwdriver | 2m Copper Wire

Specification:- 

• Voltage: 35 Volts
• PWM Frequency: 20khz
• Current Range: Within 5A
• PWM duty cycle: 1% -100%
• Adjustable Speed Range: 0~100%
• 1.5mm flat-tip stainless steel liner screwdriver

Package Includes: 1 x DC Motor Speed Control Switch 1 x Screwdriver 2 mtr Copper Electrical Wire

Combo of Electronic Projects Starter Learning Kit for little engineers In one Box, Mini Bulb Holder Project (12pcs)

Specification:-

• Comprehensive Learning Resources
• Hands-On Project-Based Learning
• Safe and Easy-to-Use Components
• Interactive Learning Experience
• The kit aligns with STEM education principles

Package includes:- 1 battery base, 1 electrical machinery, 1 air blade, 1 small light bulb, 1 base, 1 battery, 2 alligator clip, 1 switch, 1 10cm line, 1 nail, 1 copper wire, 3 paper clip, 1 motor