THE GREAT COMBO'S

Combo of Advanced Starter Kit Compatible with Arduino Projects with Instruction (245 Item)

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• 40 pin Jumper Wire
• 5V Piezoelectric Buzzer
• Blue color USB Cable
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module
• 3.3V-5v Joystick Sensor Module 

Package Included:- 1 Pcs LCD 1602 Module, 1 Pcs Breadboard Expansion Board, 1 Pcs matrix keyboard module, 1 Pcs 830 tie points Breadboard, 1 Pcs Ultrasonic Sensor, 1 Pcs Servo Motor, 2 Pcs potentiometer (10K), 1 Pcs DHT-11 (Temperature and Humidity Sensor), 1 Pcs 5V 1AMP Power supply Adapter, 1 Pcs Touch Sensor, 1 Pcs 5vlt Relay, 1 Pcs Power supply Module, 1 Pcs Joystick Module, 1 Pcs ULN2003 Stepper Motor Driver Board, 1 Pcs IC 74HC595, 1 Pcs 4 Digit 7 segment Display, 1 Pcs 7 segment display, 1 Pcs Stepper motor, 1 Pcs Active Buzzer, 1 Pcs Passive Buzzer, 5 Pcs Small button switch, 1 Pcs Tilt switch, 2 Pcs 2N2222 transistors, 1 Pcs IR receiver, 1 Pcs RGB LED, 2 Pcs Photoresistor, 1 Pcs Thermistor, 2 Pcs Diode Rectifier, 1 Pcs fan with motor, ,1 Pcs USB cable, 1 Pcs IR remote control, 1 Pcs Development Board, 40 pin jumper wire (Male to Male, Male to Female) 40 pcs each, LED (Green, Blue, Red, White, Yellow) 5 pcs each Resistor (10k, 1k, 220Ω, 100Ω, 100KΩ, 10R, 2KΩ, 5.1KΩ, 1MΩ, 330Ω) 10 pcs each 

Combo of White Heat Shrink Tubes | 1mm to 10mm | for Wire Insulation (1 mtr each)

Specification:- 

• Shrink ratio: 2:1
• Very easy to install
• High flexibility
• Color of the tube: White 
• Shrinking temperature: 90°C
• Operating temperature: 50°C to 125°C

Kit includes: 10mtr-1mtr Each - Pack (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm)

Combo of 14-Type Labeled Capacitor Kit (355 pcs) | Assorted Ceramic & Electrolytic Capacitor

Specification:-

• High-Quality Construction
• Perfect for DIY electronics enthusiasts
• Includes a variety of ceramic capacitors for stability.
• Electrolytic capacitors for higher capacitance needs
• Provides protection during transportation and organized storage.

DIY Circle Solar Panel Kit with Buzzer | Motor | LED & Fan | STEM School Project Kit

Specification:-

• 12V toy Motor
• 3V to 24V beep buzzer
• 6V, 80mAh, circle-shaped solar panel
• High-quality product
• 4-blade propeller 
• SPST small rocker switch
• Red and yellow color LEDs round shape
• Material: Hard Plastic

Package Includes: 6V 80mAh Circle shape Solar panel Round toy motor, Big Buzzer, Wire, Switch, Led Bulb, Toy fan

5.5mm Male plug and Female jack 3 pin PCB Panel mount DC power connector pack of 10pair

Specifications:

1. Working voltage: 6V to 30V
2. Power rating: 1A
3. Size: 3.5mm both
4. Contacting material: High-quality Copper
5. Highly insulated for short circuit protection

Combo of Electronic Projects Starter Learning Kit for little engineers In one Box, Mini Bulb Holder Project (12pcs)

Specification:-

• Comprehensive Learning Resources
• Hands-On Project-Based Learning
• Safe and Easy-to-Use Components
• Interactive Learning Experience
• The kit aligns with STEM education principles

Package includes:- 1 battery base, 1 electrical machinery, 1 air blade, 1 small light bulb, 1 base, 1 battery, 2 alligator clip, 1 switch, 1 10cm line, 1 nail, 1 copper wire, 3 paper clip, 1 motor

Basic Project Starter Kit Compatible with Arduino IDE & Uno R3 | DIY Electronics Kit (127 Item)

Specification:-

• Includes an Uno R3 and 400 point breadboard
• 1602 LCD Display
• 12 x 12 x 7 mm tactile switches
• 5mm round dip LED (Red, Yellow, Blue
• 16 x 2 Blue/White color LCD display
• Blue Short USB Data Charging Cable
• 1/4W Resistor (220K, 330K, 1K, 22K, 15K) 10 Pcs Each Value of Resistor

Kit Included: 1 pcs Compatible Uno R3 Board | 1 pcs USB Cable | 1 pcs Breadboard Small Size with 400 Points (Solderless) | 3 pcs Push Button | 1 pcs Potentiometer 10K | 1 pcs 5V Relay Module | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs Passive Buzzer | 15 pcs LEDs (Assorted Colors – Red, Yellow, Blue) | 1 pcs DHT11 with PCB (4 pin) | 1 pcs Keypad 4×4 | 40 pcs Jumper Wire (Male to Male) | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K) | 1 pcs 1602 LCD Display | 1 pcs 40 Pin Header | 2 pcs NPN Transistor | 2 pcs Diode 1N4001 | 1 pcs RGB LED | 1 pcs Photoresistor | 1 pcs Shift Register

Combo of 3-Way Quick Push Connectors & Wire Ferrule Terminal 0.5-2.5mm² | 14-22 AWG (270 pcs)

Specification:-

• Color: Multicolor
• Material: Copper
• Connector Type: Crimp Connector 
• Wiring: 0.5-2.5 square wire
• Temperature: -40 to 150  degree Celsius

Combo of BO Dual Shaft Motor (3V-9V) with Yellow & Black Rubber Wheels | for Smart Car Robot DIY Kit

Specification:-

• 12V Female Jack
• 2 pins SPST small rocker switch
• Black Yellow Wheel (45mm x 11mm)
• 3-9V Dual-Shaft Geared DC Moto
• Diameter of the heat Shrink tube: 2mm
• Length of the tube: 152mm (Approx)
• High-quality product

Package Includes: 2 pcs BO motor, 4 pcs wheel, 1 pcs 12v jack, 1 pcs rocker switch, and 4 pcs tubes.

Combo of kit for Uno R3 Compatible with Ar_Duino (Super Statrter Kit Combo)

Specifications:-

• 830 Points Half-Size Solderless Breadboard
• UNO R3 CH340G development board 
• USB Mini Smart & Compact Remote
• Proto Shield + Mini Breadboard
• Male-to-male jumper wire
• Female to Female Jumper Wire
• DHT11 Temperature and humidity sensor 
• Humidity Range  :  20% to 90%
• Color SMD RGB LED sensor module
• ULN2003 stepper motor driver
• Transducer Sensor DC 5V 2-450cm
• 5mm Red color LED round
• 12x12x7.3mm Tactile Push Button Switch

Kit includes:- Breadboard 1pcs, UNO R3 board 1pcs, Remote 1pcs,  Proto Shield + Mini Breadboard 1pcs, Jumper Wire Male to Male + Female to Female (10 pcs each),  humidity sensor 1pcs, RGB LED sensor 1pcs, Stepper motor 1pcs, Ultrasonic Module 1pcs, Breadboard Power Supply, 5mm LED blue, green, red 5 pcs each, 7 segment LED display 1pcs, SG90 servo motor, Dot matrix display 1pcs, Blue LCD Display 1pcs, battery clip 1pcs, Tactile Switch 4pcs, Red & Yellow Switch Cap 2pcs each, 1/4-watt resistor (1, 10, 100, 1K, 10K, 1M, 10M)-10 pieces each

13 in 1 combo of 60 watt soldering iron starter kit for project work

Specification:-

1. 100% best quality items
2. 13 Items for the soldering application
3. 60-watt soldering iron with a soft grip
4. Digital Multimeter
5. De-solder wire and Soldering iron wire
6. Heavy metal solder stand
7. Screwdriver
8. High-quality Iron bit and de-soldering pump
9. Electric current tester, Tweezer, high-quality tape, Cutter, and paste
10. Excellent choice for soldering purposes

17 in 1 combo of 25 watt soldering iron starter kit for project work

Specification:-

1. 100% best quality items
2. 17 Items for the soldering application
3. 25-watt soldering iron with a soft grip
4. Digital Multimeter
5. De-solder wire and Soldering iron wire
6. Heavy metal solder stand
7. Screwdriver
8. Magnifying glass
9. Multi-function screwdriver tool kit
10. 8-inch Plier and One Glue gun with one stick
11. High-quality Iron bit and de-soldering pump
12. Electric current tester, Tweezer, high-quality tape, Cutter, and paste
13. Excellent choice for soldering purposes