THE GREAT COMBO'S

Combo of Jumper wire with UNO Board & Ultrasonic Sensor (123 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs Ultrasonic Sensor, 1 pcs USB Cable, 1 Pcs UNO Board

Combo of IOT Starter Learning Kit Compatible with Electronic Component

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• IR remote
• Jumper Wire
• 5V Piezoelectric Buzzer
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module

Package Included:- 1X Breadboard,1X Ultrasonic Sensor,1X Servo motor, 1X push button switch,1X RGB led module,1X 5V Buzzer, 1X 12V Buzzer, 1X Potentiometer (100K),1X Sound sensor,1X MQ2, 1X 5V Channel relay,1X DHT11, 1X Dc motor,1X Fan,1X IR receiver ,1X IR remote, 1X I2C 16x2 LCD,10X Male to Male Jumper wire, 40X Male to Female Jumper wire,1X Light dependent resistors (GL12528 )

3-in-1 Robotics Starter Kit | Multipurpose DIY Robot Kit | Compatible with Arduino Uno R3 (181 Item)

Specification:

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7.3 mm tactile switch with cap
• ESP8266 Wireless Wi Fi Transceiver
• DC toy Motor Driver with wire
• 1 Digit 7 Segment LED Display
• Jumper Wire Cable 26AWG (21cm)
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1x Uno R3 Board | 1x Breadboard (400 points) | 1x 7 Segment Display (1 Digit) | 2x Push Buttons (with caps) | 1x Potentiometer | 1x DC Motor | 1x SG90 Servo Motor | 1x RGB LED Module | 2x Transistor PN2222 | 15x LEDs (Red, Green, Blue) | 1x Active Buzzer | 1x Passive Buzzer | 1x HC-SR04 Ultrasonic Sensor | 10x Resistors 220Ω | 10x Resistors 1kΩ | 40x Female-to-Female (F-F) Jumper Wires | 40x Male-to-Female (M-F) Jumper Wires | 40x Male-to-Male (M-M) Jumper Wires | 2x Diode 1N4001 | 1x Relay Module | 2x Line Sensor  | 2x Photoresistor Sensor  | 1x L293D Motor Driver Shield | 1x Battery Power Supply (with holder) | 1x Ultrasonic Sensor Holder | 1x 2WD Car Chassis

DIY Combo Kit with Jumper Wires, Development Board & 12V 5A Adapter (123 Items)

Specification:-

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 5A
• Connector Size: 5.5mm x 2.5mm Male Plug
• High-quality PVC-coated flexible wires
• Microcontroller: ATmega328P
• Clock Speed: 16 MHz
• USB to Serial: CH340G

Package Included:- 1 Pcs USB Cable,1 Pcs R3 CH340 Development Board,1 Pcs 12V 5A Power supply Adapter,40 Pcs Male to Male Jumper Wire,40 Pcs Male to Female Jumper wire,40 Female to Female Jumper wire

Combo of 1M 3 Pin Round Shaft Rotary Potentiometer Volume Pot 1M with Knob (Pack of 4)

Specification:-

• 1M 3 Pin Single Turn Round Shaft Potentiometer Pot
• Type : Single-turn rotary potentiometer
• Rotational Life : 2000K cycles
• Rotation Limit: 270-degree rotation.
• Can be use for multiple applications

Combo of Smart Dustbin Project Kit for School College Project (26 Item)

Specification:-

• HC-SR04 Ultrasonic Sensor 
• UNO R3 CH340G development board 
• 9V battery clip connector
• 9V 6F22M Hi-Watt Non-rechargeable heavy duty battery 
• SG90  Hard plastic gear servo motor
• Blue Short USB Data Charging Cable

Component List: 1xPcs UNO Board, 1xpcs 9V Battery, 1xpc 9V battery Connector, 1xpcs Ultrasonic Sensor, 1xpcs SG90 Servo Motor, 1xpcs USB Cable, 20xpcs Female to Male Jumper wire

Combo of DIY Learning Kit Compatible with Arduino for Educational Purpose (113 Item)

Specification:-

• USB Development Board 
• Sensor Modules
• 830 point Breadboard
• Blue color USB Cable
• Jumper Wire
• Electronic Resistors
• 5mm round LED
• 5V Piezoelectric Buzzer

Package Included:- 5 pcs each LED (White, Yellow, Blue, Green, Red), 1 pcs RGB LED, 2 pcs Photoresistor, 1 pcs Thermistor, 2 pcs Diode Rectifier (1N4007), 2 pcs Transistor (TIP31), 1 pcs Tilt Switch, 5 pcs push Button (small), 1 pcs each (IC L293D ,IC 74HC595 ), 1 pcs Active Buzzer, 1 pcs Passive Buzzer, 1 pcs Potentiometer, 1 pcs Joystick Module, 1 pcs 5V Relay, 1 pcs UNO Controller Board, 1 pcs 830 Point Breadboard, 1 pcs Power Supply Module, 1 pcs Ultrasonic Sensor, 1 pcs 3V Servo Motor, 1 pcs Fan Blade, 10 pcs Female to Female Jumper Wire, 10 pcs Male to Male Jumper Wire, 1 pcs USB Cable, 10 pcs Resistor (220K), 10 pcs Resistor (330K), 10 pcs Resistor (1K), 10 pcs Resistor (10K)

Smart Learning Robotics & IoT Kit | Beginner to Advanced STEM Project Kit | Compatible with Arduino IDE & Uno R3 (154 Item)

Specification:-

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• ESP8266 Wireless WiFi Transceiver
• DC toy Motor Driver with wire
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1 pcs Uno R3 Board | 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard Small Size with 400 Points Solderless | 2 pcs Push Button with Caps | 1 pcs Potentiometer | 1 pcs ESP01 8266 | 1 pcs 7 Segment 1 Digit Cube Display | 1 pcs IC 74HC595 | 1 pcs Transistor PNP2222 | 15 pcs LEDs (Red, Blue, Green) | 1 pcs DHT11 with PCB (3 pin) | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs RGB LED with PCB | 1 pcs 1602 I2C LCD Display | 1 pcs Active Buzzer | 1 pcs Passive Buzzer  | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs HC05 Bluetooth Module | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K assorted) | 20 pcs Jumper Wire (Male to Male) | 20 pcs Jumper Wire (Female to Female) | 20 pcs Jumper Wire (Female to Male) | 1 pcs Diode 1N4001 | 1 pcs 5V Relay Module | 2 pcs IR Line Sensor | 2 pcs Photoresistor | 1 pcs L293D Motor Driver Shield with soldered pins | 1 pcs Power Supply Box (6 Cell Holder) | 1 pcs Ultrasonic Sensor Holder | 1 pcs 2WD Car Chassis

Combo of BO Motor, Yellow Wheel with UNO Board & Jumper Wire (40 Item)

Specification:-

• UNO R3 development board
• 11 mm Male Berg Strip1 x 40 Pin header 
• HC-SR04 Ultrasonic Sensor
• Male to male Jumper Wire cable
• L293D 4-Channel DC Motor Driver
• IR Proximity Sensor 
• 60mm x 25mm Hard plastic wheel

Package Included:- 1 pcs UNO Board, 1 pcs SG90 Servo Motor, 1 pcs 9V Toy Battery, 1 pcs 9V battery clip connector with 3.5mm pin jack, 1 pcs 40 pin Header, 2 pcs KCD1-B101 6A 250V AC Red Rocker switch, 1 pcs HC-SR04 Ultrasonic Sensor Mounting Bracket, 4 pcs BO motor, 20 pcs Jumper wire, 1 pcs L293D 4-Channel DC Motor Driver, 1 pcs Ultrasonic Module HC-SR04, 1 pcs IR Proximity Sensor, 1 pcs USB Cable, 4 pcs 60mm x 25mm Hard plastic Yellow Wheel

Combo of 50K 3 Pin 14mm Long Round Shaft Rotary Potentiometer Volume Pot 50K with Knob (Pack of 4)

Specification:-

• 50K 3 Pin Single Turn 14mm long shaft round Potentiometer Pot
• Type : Single-turn rotary potentiometer
• Rotational Life : 2000K cycles
• Rotation Limit: 270-degree rotation.
• Can be use for multiple applications

Combo of Power Supply Module | Jumper Wires | 9V Battery Clip | Alligator Clip (28 pcs)

Specification:-

• MB-102 3.3V/5V Power Supply Module
• Input Voltage: 6.5–12V (DC) or USB Power
• 40mm crocodile alligator clip 
• 26AWG Jumper Wire cable
• 9V battery clip connector with 3.5mm pin jack
• 830 Points Half Size Solderless Breadboard
• 400 points Half-size Solderless breadboard

Package Included:- 1 x 830 Points Breadboard, 1 x 400 point breadboard , 1 x 9V battery clip connector, 1 x MB-102 Power Supply Module, 4 x Crocodile alligator clip, 20 x Male to Male Jumper Wire

Combo of IIC or I2C Serial Interface Adapter Module with 16 x 1 Yellow/Green Color LCD Display

Specification:-

Display

• Color of display: Green
• Color of character: Yellow
• Input voltage : +5V
• Supply current : 1.2mA
• Size : 16 x 1 (16 character x 1 rows)

Module

• IC Name: PCF8574
• Operating voltage: 5V
• PCB size : 42mm x 20mm(L x B) 

Package Included: 1 pcs IIC or I2C Serial Interface, 1pcs 16 x 1 LCD display