THE GREAT COMBO'S

Combo of Electronics DIY Kit | Breadboard | Jumper Wires | DHT11 Sensor | LCD Display & R3 Board (125 Items)

Specification:-

• DHT11 5V Sensor Module
• 16 x 2 LCD Green & Yellow display
• LCD Size : 16 x 2 (16 character x 2 rows)
• 400 point Breadboard 
• Breadboard Dimensions : 82mm x 55mm 
• R3 CH340G 5V development board 
• Model name : UNO R3 

Combo of Jumper wire with UNO Board & Ultrasonic Sensor (123 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 

Package Included:- 40 pcs Male to Male Jumper wire, 40 pcs Female to Female Jumper wire, 40 pcs Male to Female Jumper Wire, 1 pcs Ultrasonic Sensor, 1 pcs USB Cable, 1 Pcs UNO Board

Smart Learning Robotics & IoT Kit | Beginner to Advanced STEM Project Kit | Compatible with Arduino IDE & Uno R3 (154 Item)

Specification:-

• Includes an Uno R3 and a 400 point breadboard
• 12 x 12 x 7 mm tactile switch with cap
• ESP8266 Wireless WiFi Transceiver
• DC toy Motor Driver with wire
• Resistor type: 1/4 watt carbon film resistor
• Sensors: DHT11, Ultrasonic, etc.
• Complete Arduino Kit with 100+ components.

Kit Included: 1 pcs Uno R3 Board | 1 pcs NodeMCU ESP8266 | 1 pcs Breadboard Small Size with 400 Points Solderless | 2 pcs Push Button with Caps | 1 pcs Potentiometer | 1 pcs ESP01 8266 | 1 pcs 7 Segment 1 Digit Cube Display | 1 pcs IC 74HC595 | 1 pcs Transistor PNP2222 | 15 pcs LEDs (Red, Blue, Green) | 1 pcs DHT11 with PCB (3 pin) | 1 pcs DC Motor | 1 pcs SG90 Servo Motor | 1 pcs RGB LED with PCB | 1 pcs 1602 I2C LCD Display | 1 pcs Active Buzzer | 1 pcs Passive Buzzer  | 1 pcs Ultrasonic Sensor HC-SR04 | 1 pcs HC05 Bluetooth Module | 50 pcs Resistors (220K, 330K, 1K, 22K, 15K assorted) | 20 pcs Jumper Wire (Male to Male) | 20 pcs Jumper Wire (Female to Female) | 20 pcs Jumper Wire (Female to Male) | 1 pcs Diode 1N4001 | 1 pcs 5V Relay Module | 2 pcs IR Line Sensor | 2 pcs Photoresistor | 1 pcs L293D Motor Driver Shield with soldered pins | 1 pcs Power Supply Box (6 Cell Holder) | 1 pcs Ultrasonic Sensor Holder | 1 pcs 2WD Car Chassis

Combo of 3D Room Model with Easy to Connect Light, Horn, Fan and Solar Energy kit - 7 Activities

Specification:-

• AA 4 cells Battery holder
• 4V – 12V mini shaft RC motor
• 6V, 100mAh, square-shaped solar panel
• AA 1.5V non-rechargeable battery 
• High-quality polycrystalline solar panel
• 3-blade nylon glass fiber build propeller
• Cylindrical Piezoelectric passive continuous beep buzzer

Kit includes:- Solar, Buzzer, Motor, Holder, 4 blade Propeller, 3 blade Propeller, LED, Non-Rechargeable Battery

Combo of 50k 3 Pin Round Shaft Rotary Potentiometer Volume Pot 50K with Knob (Pack of 4)

Specification:-

• 50K 3 Pin Round Shaft Potentiometer Pot
• Type : Single-turn rotary potentiometer
• Rotational Life : 2000K cycles
• Rotation Limit: 270-degree rotation.
• Can be use for multiple applications

DIY Combo Kit with Jumper Wires, Development Board & 12V 5A Adapter (123 Items)

Specification:-

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 5A
• Connector Size: 5.5mm x 2.5mm Male Plug
• High-quality PVC-coated flexible wires
• Microcontroller: ATmega328P
• Clock Speed: 16 MHz
• USB to Serial: CH340G

Package Included:- 1 Pcs USB Cable,1 Pcs R3 CH340 Development Board,1 Pcs 12V 5A Power supply Adapter,40 Pcs Male to Male Jumper Wire,40 Pcs Male to Female Jumper wire,40 Female to Female Jumper wire

Beginner's Kit for Uno R3 | DIY Electronics & STEM Starter Kit | Compatible with Arduino IDE (57 Item)

Specification:-

• Complete Arduino Kit with 100+ components.
• 12 x 12 x 7 mm tactile switch
• 5V Piezoelectric Beep Buzzer
• USB Cable for Arduino Nano
• SG90 Servo Motor
• UNO R3 AVR USB Development board
• Light Dependent Resistors sensor
• Resistor type: 1/4 watt carbon film resistor (220K, 330K)

Kit includes:-

1x Uno R3 Board | 1x USB Cable | 20x LEDs (Red, Yellow, Blue, Green) | 1x Potentiometer | 6x Push Button Switch | 2x Photoresistor | 20x Resistor | 1x RGB Led | 1x 7-Segment 1-Digit | 1x Breadboard 400 Point | 1x Buzzer | 1x Servo Motor | 1x Vibration Switch

Combo of Jumper Wire & UNO Board with Ultrasonic Sensor Module (64 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 
• G90 Micro digital servo motor 

Package Included: 20 pcs Male to Male Jumper wire | 20 pcs Female to Female Jumper wire | 20 pcs Male to Female Jumper wire | 1 pcs Ultrasonic Sensor | 1 pcs USB Cable | 1 pcs SG90 Servo Motor | 1 pcs UNO R3 AVR USB Development board

Combo of DIY Learning Kit Compatible with Arduino for Educational Purpose (113 Item)

Specification:-

• USB Development Board 
• Sensor Modules
• 830 point Breadboard
• Blue color USB Cable
• Jumper Wire
• Electronic Resistors
• 5mm round LED
• 5V Piezoelectric Buzzer

Package Included:- 5 pcs each LED (White, Yellow, Blue, Green, Red), 1 pcs RGB LED, 2 pcs Photoresistor, 1 pcs Thermistor, 2 pcs Diode Rectifier (1N4007), 2 pcs Transistor (TIP31), 1 pcs Tilt Switch, 5 pcs push Button (small), 1 pcs each (IC L293D ,IC 74HC595 ), 1 pcs Active Buzzer, 1 pcs Passive Buzzer, 1 pcs Potentiometer, 1 pcs Joystick Module, 1 pcs 5V Relay, 1 pcs UNO Controller Board, 1 pcs 830 Point Breadboard, 1 pcs Power Supply Module, 1 pcs Ultrasonic Sensor, 1 pcs 3V Servo Motor, 1 pcs Fan Blade, 10 pcs Female to Female Jumper Wire, 10 pcs Male to Male Jumper Wire, 1 pcs USB Cable, 10 pcs Resistor (220K), 10 pcs Resistor (330K), 10 pcs Resistor (1K), 10 pcs Resistor (10K)

Combo of IOT Starter Learning Kit Compatible with Electronic Component

Specification:-

• Ultrasonic Module
• 830 point Breadboard
• IR remote
• Jumper Wire
• 5V Piezoelectric Buzzer
• SG90 Small digital servo motor
• 3 Color SMD RGB LED sensor module

Package Included:- 1X Breadboard,1X Ultrasonic Sensor,1X Servo motor, 1X push button switch,1X RGB led module,1X 5V Buzzer, 1X 12V Buzzer, 1X Potentiometer (100K),1X Sound sensor,1X MQ2, 1X 5V Channel relay,1X DHT11, 1X Dc motor,1X Fan,1X IR receiver ,1X IR remote, 1X I2C 16x2 LCD,10X Male to Male Jumper wire, 40X Male to Female Jumper wire,1X Light dependent resistors (GL12528 )

Combo of BO Motor, Yellow Wheel with UNO Board & Jumper Wire (40 Item)

Specification:-

• UNO R3 development board
• 11 mm Male Berg Strip1 x 40 Pin header 
• HC-SR04 Ultrasonic Sensor
• Male to male Jumper Wire cable
• L293D 4-Channel DC Motor Driver
• IR Proximity Sensor 
• 60mm x 25mm Hard plastic wheel

Package Included:- 1 pcs UNO Board, 1 pcs SG90 Servo Motor, 1 pcs 9V Toy Battery, 1 pcs 9V battery clip connector with 3.5mm pin jack, 1 pcs 40 pin Header, 2 pcs KCD1-B101 6A 250V AC Red Rocker switch, 1 pcs HC-SR04 Ultrasonic Sensor Mounting Bracket, 4 pcs BO motor, 20 pcs Jumper wire, 1 pcs L293D 4-Channel DC Motor Driver, 1 pcs Ultrasonic Module HC-SR04, 1 pcs IR Proximity Sensor, 1 pcs USB Cable, 4 pcs 60mm x 25mm Hard plastic Yellow Wheel

Combo of 1M 3 Pin Round Shaft Rotary Potentiometer Volume Pot 1M with Knob (Pack of 4)

Specification:-

• 1M 3 Pin Single Turn Round Shaft Potentiometer Pot
• Type : Single-turn rotary potentiometer
• Rotational Life : 2000K cycles
• Rotation Limit: 270-degree rotation.
• Can be use for multiple applications