THE GREAT COMBO'S

Combo of Wire Crimp Connector Assorted Kit | Ring, Spade, Fork, Butt, Male & Female Connectors (280 Pcs)

Specification:-

• Product Type: Assorted Wire Connector Kit
• Material: Copper + PVC Insulation
• Total Pieces: 280 pcs
• Connector Types: Ring, Spade, Fork, Butt, Male, Female
• Color Code: Red (22–16 AWG), Blue (16–14 AWG), Yellow (12–10 AWG)
• Package Type: Compartmentalized plastic storage box

Combo of XH-W1209 Temperature Controller | Probe | 3.5" 24V Cooling Fan | 12V 1A Power Adapter (5 Items)

Specification:-

1.XH-W1209

• Temperature Range: -50°C to 110°C
• Operating Voltage: 12V DC
• Temperature Control Mode: Heating & Cooling
• Accuracy: ± 0.1°C
• Relay Output: Supports up to 10A load

2. 24V DC Cooling Fan

• Operating Voltage: 24V DC
• Compact Size: 3.5 inches for versatile cooling applications
• High-Speed Airflow: Ensures efficient cooling for electronics and enclosures
• Low Noise Operation: Provides effective cooling with minimal noise
• Durable & Reliable Build: Ideal for continuous operation

3.DC Power Supply Adapter

• Input Voltage: AC 100-240V
• Output Voltage: DC 12V, 1A
• Connector Type: Standard 5.5mm x 2.1mm DC plug
• Short-Circuit & Overload Protection for device safety
• Lightweight & Compact Design for easy portability

Combo of Jumper Wire & UNO Board with Ultrasonic Sensor Module (64 Item)

Specification:-

• Ultrasonic Module HC-SR04
• Operating voltage: 5V DC
• Operating current: 15 mA
• 40 pin Jumper Wire cable 
• UNO R3 CH340G development board
• Blue Short USB Data Charging Cable 
• G90 Micro digital servo motor 

Package Included: 20 pcs Male to Male Jumper wire | 20 pcs Female to Female Jumper wire | 20 pcs Male to Female Jumper wire | 1 pcs Ultrasonic Sensor | 1 pcs USB Cable | 1 pcs SG90 Servo Motor | 1 pcs UNO R3 AVR USB Development board

Combo of DIY Starter Kit with UNO Board | Resistor & Jumper wire (113 Item)

Specification:-

• Resistor type: carbon film resistor
•  HC-SR04 Ultrasonic Sensor
• 400 points Half size Solderless breadboard 
• 10mm Yellow Dip Led round shape
• 9V battery clip connector
• UNO R3 CH340G development board
• Soil Hygrometer Humidity Detection Moisture Sensor 

Package Included: 1 pcs UNO Board | 1 pcs Breadboard | 1 pcs Ultrasonic Sensor | 1 pcs water sensor | 1 pcs USB Cable | 5 pcs Yellow LED | 5 pcs Red LED | 5 pcs Green LED | 1 pcs 9V battery connector | 2 pcs 1 Digit 7 segment Display | 1 pcs 5V Buzzer | 1 pcs Soil Hygrometer Humidity Sensor | 40 pcs Male to Female Jumper wire | 6 pcs push button switch with Cap (12x12x7mm) | 1 pcs IR Proximity Sensor | 10 pcs Resistor (1K) | 10 pcs Resistor (10K) 10 pcs Resistor | (22K) 10 pcs Resistor | (100K) 1 pcs LDR sensor module (LM393)

Combo of 12V 2A DC Power Supply Adapter with 5.5mm Male Connector & RGB Controller Multifunctional

Specification:-

• Input voltage : 100V to 265V AC
• Output voltage: 10 to12V
• Power rating: 2A
• Max. frequency range: 50 to 60 Hz
• Cable length: 1.10 meters
• Working temperature:- 20-60 °C
• Remote distance:- 100m

R3 CH340G Development Board Combo | L298N Motor Driver | SG90 180° Servo Motor | DIY Robotics Kit

Specification: 

• Operating voltage: 3V to 7.2V
• Recommended voltage: 5V
• Rotation: 0°-180°
• The operating speed is 0.1s/60° (4.8V)
• Chip name : ATMEGA328
• Clock frequency : 16Mhz
• Digital input/output pins : 14 (of which 6 provide PWM output)
• Driver module : L298N
• Maximum power : 25W
• Driver current : 2A

Package Included:-  1 Pcs L298N Motor Drive,1 Pcs SG 90 Motor,1 Pcs R3 CH340G Development Board

Electronic Sensors Kit with DIY Projects Controller Board, RFID, Ultrasonic, IR, Smoke Components (95 Item)

Specifications:-

• 400 points Half size Solderless breadboard
• UNO R3 AVR USB Development board
• 6V - 12V DC Mini underwater pump
• Humidity Detection Moisture Sensor
• 16 x 2 Yellow/Green color LCD display
• RC522 RFID Card Reader Module
• Flammable gas and smoke detection sensor
• IR Proximity Sensor for Line Follower
  

Component List: 1 Pcs Controller Board, 1 Pcs Breadboard, 1 Pcs 4X4 16 Matrix Membrane Keypad, 1 Pcs USB cable, 1 Pcs Ultrasonic Sensor, 1 Pcs IR Proximity Module 1 Pcs DHT-11 Sensor, 1 Pcs MQ-2 smoke detection sensor module, 1 Pcs RC522 RFID Card Reader Module, 1 Pcs 16x2 LCD, 1 Pcs Soil Hygrometer Humidity, 1 Pcs mini water Pump, 5 pieces each of red, green, and white LEDs, 1 Pcs RGB LED, 10 Pcs Resistor (100K), 1 piece of 9V battery, 2 Pcs 100K ohm vertical preset variable resistors, 1 piece of 1-digit 7-segment Display 1 Pcs Buzzer, 2 Pcs push button switch (12x12x7), 4 Pcs NPN transistor (BC547), 2 Pcs rectifier diodes (1N4007 ), 1 Pcs light-dependent resistor (GL5528), 1 Pcs 9V battery connector, 40 Jumper wires (Male to Female, Male to Male)

12V 2A Adapter with 5.5mm Female BNC Connector, Ideal for CCTV & LED DIY Projects

Specification:

1. Input voltage: AC 100–240V
2. Output voltage: 12V
3. Power rating: 2A
4. Color: Black
5. Max. frequency range: 50 to 60 Hz
6. Over-current, overload, and short circuit protection
7. Type: Power Connector
8. Connector Type - 5.5mm Female BNC Screw-Type Connector

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

Combo of BO Motor | Rubber Wheels | 4CH Transmitter & Battery Holder (11 Item)

Specification:-

• 4CH RC remote control
• Diameter of the wheel : 60mm
• BO gear motor compatible
• High-quality material build
• AA 4 cell battery holder
• AA 2 cell battery holder
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)

Combo DIY School Science Experiment Kit with 61 Items Including DC Motor STEM Educational Project

Specification:-

• High-performance battery
• Nominal voltage : 9V
• Non-rechargeable
• Working voltage : 9V
• Power rating : 1A
• DC Motor: Rated Voltage: 4V 
• Motor & Fan DIY Kit

Package Included :- 5 Pcs 9V Battery, 5 Pcs DC Mini Motor, 5 Pcs Fan Blades, 5 Pcs Rocker Switches, 5 Pcs Green Led, 5 Pcs Blue Led,5 Pcs Red Led, 5 Pcs Yellow Led, 5 Pcs Orange, 10 Pcs 1K Resistors, 6 Pcs Colored Wire, 5 Pcs 9V Battery Clip Connector  

DIY Science Experiment Starter Kit with DC Motor | Resistor (96 Item)

Specification:-

• High-performance battery
• Non-rechargeable
• Motor & Fan DIY Kit
• Mini Electric Motor 
• 9V battery 
• Hook up single-core wires.
• 1k Ohm Through-Hole Resistors
• AA 1.5V Nonrechargeable battery cell
• Multicolor 4 blade hard plastic build propeller 

Package Included: 2 Pcs 9V Battery, 6 Pcs DC Mini Motor, 5 Pcs Fan Blades, 4 Pcs Rocker Switches, 5 Pcs Green Led, 5 Pcs red Led, 25 Pcs 1K Resistors, 3 Pcs Colored Wire, 2 Pcs 9V Battery Clip Connector, 20 pcs Jumper wire male to mala, 1CS Buzzer, 1 pcs RC motor, 6 pcs 3v motor, 2 pcs battery holder, 2 pcs 7 LED strip aluminium Light Bulbs, 4 pcs AA 1.5V Non rechargeable