3S 10A 12V 18650 Lithium Battery Charger Board Protection Module

3S 10A 12V 18650 Lithium Battery Charger Board Protection Module

A 3S 10A Lithium Ion Battery charging and protection BMS Module is what this module is. 3S in this context refers to 3 x 3.7 = 11.1V, or 3 Li-ion batteries wired in series. This module protects the Battery Pack from overcharging, over-discharging, short circuits, and overcurrent draw. Additionally, the battery is charged evenly. 3S stands for three 18650 batteries or a series arrangement of polymer lithium batteries in the 3S 10A 12V 18650 Lithium Battery Charger Board Protection Module. 10.8V is the polymer battery's rated voltage, although 11.1V 18650 or 3.7V lithium batteries have rated voltages, and 12.6V lithium batteries can be charged.

Note: Make sure that all of the batteries in the battery pack have the same voltage level before attaching it or creating a battery pack; if any of the batteries have a different voltage, give them a cycle of charge/discharge to bring them all to the same level. Only then should the battery pack be connected to the battery management system.

Formula expansion:-

• 2000 capacity in a 1C battery multiplied by 2AH times one results in a 2A maximum current.
• 2000 capacity is 2 AH * 3 (2C battery expansion), or a 6A maximum operational current.
• If the battery gets too hot, it cannot be used for an extended period of time since the battery will quickly be damaged.
  
  Features:-
• Three series of protective boards for lithium batteries.
• When the conditions for protection are restored, automatically cancels protection.
• Equipped with the ability to protect against overcharge, over-discharge, short circuits, and overcurrent.