NEW ARRIVALS

PD65W USB-C Type Fast Charging Module Board

Specification:-

• Voltage: 12V
• Output Power: 65W
• Board Thickness: 2mm
• Input Interface: USB Type-C
• Output Voltage Levels: 5V / 9V / 12V / 15V / 20V
• Charging Protocols Supported: PD3.1, QC3.0

5200mAh 12V Li-ion Rechargeable Battery Pack with BMS & DC Male/Female Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 5200Ah
• Connector Type: DC 5.5mm Jack & DC Pin 
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

STEM Learning 4WD Robot Car Kit | Smart Vehicle Project with Arduino UNO R3 | Bluetooth & Sensor

Specification:-

• Controller Board: Arduino UNO R3 
• Motor Driver Module: L298N Dual H-Bridge Motor Driver
• Motors: 4 × DC Gear Motors with Wheels
• Power Supply: 2 × 18650 Lithium-ion Battery Holder (7.4V)
• Chassis: Acrylic/Metal Chassis Plate with Mounting Holes
• Connectivity: USB Type-A To B Cable for Programming
• Comprehensive C/C++ programming capabilities

12V 5A 60W SMPS LED Driver Power Supply | AC 175–265V to 12V DC Converter

Specification:-

1. Output Voltage: 12V
2. Output Current: 5A 
3. Output Power: 60W
4. Input Voltage: 175V/265V AC
5. Frequency: 50/60Hz
6. IP Level-Waterproof

2000mAh 12V Li-ion Rechargeable Battery Pack with BMS | DC Female & JST Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 2000Ah
• Connector Type: DC 5.5mm Female & 2 pin JST Connector  
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

12V DC Brushless Exhaust Blower Fan | Cooling & Air Ventilation Fan

Specification

• Model: DW127530-SL1
• Motor Type: Brushless DC Motor
• Rated Voltage: 12V DC
• Operating Voltage: 9V – 14V DC
• Current Rating: ~0.15A
• Connector Type: 2-Pin JST Connector
• Cable Length: 22cm 
• Fan dimension: 75x73x30 mm (approx.)
• Low power consumption

DIY Line Follower Robot Kit | Arduino IDE Compatible | 3-Array IR Sensor | Robotics STEM Learning Kit for Students

Specification:

• Controller: Arduino Uno R3 compatible board
• Sensor: 3-Array IR Line Tracking Module
• Motor Driver: L298N or equivalent
• Motors: DC Gear Motors with wheels
• Chassis: DIY car frame with caster wheel
• Power: Battery holder included
• Programming: Arduino IDE

4000mAh 12V Li-ion Rechargeable Battery Pack with BMS | DC Female & 2515 JST Connector

Specification:-

• 18650 Li-ion rechargeable battery
• Battery type : Lithium-Ion Battery
• Voltage: 10.4-12.8V DC
• Capacity: 4000Ah
• Connector Type: DC 5.5mm Female & 2 pin JST Connector  
• Output Current: 10 amp
• Protection: Inbuilt BMS (Overcharge / Over-discharge / Short circuit)

5V DC MP3 Player Decoder Board with USB, TF Card, AUX & FM | Digital Display Audio Module with Remote Control

Specification:-

• Working voltage:  5V
• Support:  mp3/Bluetooth/USB/aux/FM/memory card
• Audio Formats Supported: MP3
• Input Options: USB, TF Card (Micro SD), AUX IN
• FM Radio: Yes (Built-in FM Receiver)
• Control: Button Control + IR Remote Control
• Excellent sound quality
• Can connect speakers directly
• Remote for easy handling

13.56MHz RFID Tag with Multicolor Keychain for Access Control Pack of 5

Specification:-

• Range: 0-10 cm
• Frequency: 13.56 MHz
• Passive RFID Tag key
• 32bit Unique ID
• Color: Multicolor 
• 64-bit data stream (Header+ID+Data+Parity)
• Reading Distance about 5 to 12 cm (depending upon the reader)

STEAM Educational Learning Kit (Age 8+)

Specification:

• Kit Type: DIY Science & Robotics Educational Kit
• Recommended Age: 8+ years
• Total Components: 16+ electronic parts (motor, LEDs, buzzer, solar panel, resistors, switches, etc.)
• Power Source: Battery holder & solar panel (included)
• Learning Scope: Basic electronics, renewable energy, robotics fundamentals
• Durability: Reusable and safe for multiple projects

Kit Included:

DIY Self-Balancing Robot Car Kit | Uno R3 + L298N Motor Driver + MPU6050 | Compatible with Arduino IDE

Specification:-

• Main Controller: Uno R3 Board
• Motor Driver: L298N Dual H-Bridge
• Sensor: MPU6050 Gyroscope + Accelerometer
• Power Supply: Battery-powered (holder included)
• Compatibility: Arduino IDE / DIY Robotics Projects