ALL ELECTRONICS COMPONENTS

1.5μF 155J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage: 250V 
2. Dimensions = 19.0mm(W)
3. Dimensions = 15.0mm(H)
4. Dimensions = 1.1mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = ≥ 1250S Ω 

DO-201AD, SF58 600V Super Fast Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 400v
2. Maximum average rectified current : 5.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-201AD
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.7V
7. Maximum reverse recovery time : 35ns

2N6107 PNP Transistors 70V (TO-220 Package) Pack of 100

• Transistor Polarity - PNP
• Collector-Emitter Voltage (VCEO) - 70V
• Continuous Base Current (IB) - 3A
• Continuous Collector Current (IC) - 7A
• Emitter cut-off current (IC) - 500mA
• DC Current Gain (hFE) - 2
• Operating Temperature Range - (-65 - 150°C)
• Transition Frequency (fT) - 10MHz

0.022μF 223J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 6.0mm
8. Dimensions of Length : 16.5mm

1.0μF 105J 250VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250VAC
• Dimensions = 36.0mm(W)
• Dimensions = 28.0mm(H)
• Dimensions = 18.5mm(T)
• Dimensions = 30.0mm(P)
• Dimensions = 0.8(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 10pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each

MQ2 Methane, Butane, LPG and smoke detection sensors pack of 5pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  10kΩ to 30KΩ
4. Load resistance  :  20kΩ (Adjustable)
5. Heating consumption  :  lower than 800mW
6. Concentration scope : 200 to 10,000ppm

White color Potentiometer knob Rotary switch caps pack of 20pcs

Specifications

1. Material: Bakelite
2. Color : White and Black
3. Uses : φ6-axis potentiometer, band switches, buttons, and so on
4. Spot : Shaft hole 6mm 6.4mm
5. Diameter : 16mm (approx)
6. Height : 15mm (approx)
7. Fixation : By pressing down

0.47μF 474J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 15mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

4N35 Optocoupler, phototransistor output with base connection DIP 6 pins IC pack of 50pcs

Specification

1. Reverse voltage : 6V
2. Forward current : 50mA
3. Surge current : 1A
4. Power dissipation : 70mW
5. Collector emitter breakdown voltage : 70V
6. Emitter base breakdown voltage : 7V

10 ohm ( Ω ) 10 Watt Fusible Ceramic Cement Power Resistor Pack of 250

Specification:-

• Resistance: 10 ohm (Ω)
• Tolerance: 5%
• Resistor type: fusible ceramic cement power resistor
• Power rating: 10W
• Can withstand in high-energy and high-voltages at high temperatures
• Reliable and offers a long service life

TDA2003 10W Car radio audio amplifier DIP 7 pins IC pack of 50pcs

Specifications

1. Operating voltage :  8V to 18V
2. Power dissipation : 20W
3. Voltage gain : 80dB
4. Supply voltage rejection :  36dB
5. Short circuit protection
6. Thermal protection