ALL ELECTRONICS COMPONENTS

20 Pcs 56K Ohm (Ω) 1 Watt ±5% Tolerance 56K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance : 56K ohm
• Tolerance : 5%
• Resistor type : carbon film
• Power rating : 1W
• Max. operating voltage : 180V to 240V

0.33μF 334J 630V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage: 630V 
2. Dimensions = 15.0mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 1.1mm(T)
5. Dimensions = 15.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = ≤7500M Ω

100uf / 160V Aluminum Electrolytic Capacitors (16 X 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 16 X 25mm
4. Voltage Rating :  160V
5. Capacitance: 100uf
6. Capacitance tolerance : ±20%(M)

4N35 Optocoupler, phototransistor output with base connection DIP 6 pins IC pack of 50pcs

Specification

1. Reverse voltage : 6V
2. Forward current : 50mA
3. Surge current : 1A
4. Power dissipation : 70mW
5. Collector emitter breakdown voltage : 70V
6. Emitter base breakdown voltage : 7V

50 Pcs 270K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 270K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 270K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

HER107 800V 1A Surface mount Schottky barrier high efficient rectifier SMD diode pack of 50pcs

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 10pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each

SMB(G), ER3C 150V Surface Mount Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : SMB(G)
2. Maximum respective peak reverse voltage : 150v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 0.95V

TDA2009 Dual channel 10W + 10W stereo amplifier 11 pins IC pack of 50pcs

Specification

1. Supply operating voltage : 8V to 28V
2. Output power per channel : 10W
3. Input resistance : 200KΩ
4. Peak output current : 3.5A
5. Power dissipation : 20W

BC328, -800mA, -25V TO-92 Package General purpose PNP transistor pack of 10 pcs

Specification

1. Type:   Transistor
2. Polarity:   PNP
3. Collector - Emitter voltage:  -800 volts
4. Collector current:   25 mA
5. Gain H(fe):  100/630
6. Power dissipation:  625 mW
7. F(t) minimum:  50 MHz
8. Package: TO-92
9. Max Storage & Operating temperature Should Be: -55 to +150 Centigrade

4.7uf 50V Aluminum Electrolytic Capacitors (5 X 11 mm) Pack of 5

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 5 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 880
• Ripple current = 88
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

R-6, 6A4 400V General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 400v
2. Maximum average rectified current : 6.0A
3. Maxim reverse current : 10µA
4. Case :  R-6
5. Non-Repetitive Peak Forward Surge Current : 400A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 0.95V