ALL ELECTRONICS COMPONENTS

3.3μF 335J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 25.0mm(W)
3. Dimensions = 19.0mm(H)
4. Dimensions = 11.5mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

0.47μF 474J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 29.0mm(W)
• Dimensions = 25.0mm(H)
• Dimensions = 16.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 10pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each

100 ohm ( Ω ) multi turn trimpot variable resistor 3296W-1-101LF pack of 5pcs

Specifications

1. Type                              : multi turn variable resistor
2. Resistance value        : 100 Ω
3. Tolerance                    : ±10 %
4. Temperature Range  : -55 °C to +125 °C
5. Rotational Life           : 200 cycles

TL074CN Low noise JFET Quad operation amplifier DIP 14 pins IC pack of 50pcs

Specification

1. Wide power supply Range
   1. Singe supply :  10V to 30V
   2. Dual supply : ±5V to ±15V
2. Number of amplifiers : 4
3. Gain bandwidth : 3MHz
4. Current input bias : 65pA
5. Voltage input offset : 3mV

BF494 Medium frequency NPN transistors box of 2000pcs

Specification:-

1. Transistor type  :  Medium frequency NPN transistor
2. Collector-Base Voltage  :  30V
3. Collector-Emitter Voltage  :  20V
4. Emitter-Base Voltage  :  5V
5. Continuous Collector Current  :  30mA

15.2cm x 10.2cm Copper clad plan printed circuit boards or PCB pack of 10pcs

Specification:

• Copper clad coating PCB
• Dimension : 15.2cm x 10.2cm
• Board thickness: 1 mm
• Circuit printing: single side
• High wear and tear properties
• Excellent heat resistance

T1117-ADJ SOT 223 Voltage Regulator Pack of 50pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 1.485 - 1.515
5. Storage Temperature:  -65° C to +150° C

0.56 inch 3 digit Red display color 7 segment LED display COMMON CATHODEs pack of 50pcs

Specification:

1. Number of digit : 3
2. Display type : 7 segment
3. Configuration : common cathode
4. Number of pins : 10
5. LED color : Red
6. Operating current : 10mA
7. Length of the LED : 38mm
8. Width of the LED : 19mm

DO-41, R2500 2500V High Voltage Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 2500v
2. Maximum average rectified current : 0.2A
3. Maxim reverse current : 5.0µA
4. Case :  DO-41
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 3.0V

50 Pcs 270K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 270K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 270K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

4.7M ohm 1206 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 1206
2. Resistance : 4.7M
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V