ALL ELECTRONICS COMPONENTS

470uf 35V Aluminum Electrolytic Capacitors (10 X 20 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 10 x 20 mm
• Impedance (O)max. 20°C 1000KHz = 38
• Ripple current = 1050
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

20N60 650V 20.7A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 650V
• Continuous Drain Current (Id): 20.7A
• Drain-Source Resistance (Rds On): 190Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 58 nC
• Operating Temperature Range: -55 to 150°C
• Power Dissipation (Pd): 208W

M8550 1000mA 25V SOT-23 PNP Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 25V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 150MHz
7. Gain H(fe): 85/300
8. Collector current:  1000mA

0.47μF 473J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V
2. Dimensions = 13.5mm(W)
3. Dimensions = 10.0mm(H)
4. Dimensions = 6.5mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

CD4053BE Triple 2 channel analog multiplexer DIP 16 pins IC pack of 10pcs

Specification

1. Wide range of digital and analog signal levels
   1. Digital : 3 V to 20V
   2. Analog : ≤ 20V_P-P
2. Gain bandwidth : 30MHz
3. Current leakage : 100nA
4. Channel to channel matching : 5Ω (ohm)
5. On state resistance : 240 Ω ( ohm )

SN74HC04N Hex inverters low power DIP 14 pins IC pack of 50pcs

Specification

1. Consist of six independent inverters
2. Supply voltage range: 2V to 6V
3. Input clamp current : 20mA
4. Power dissipation capacitance per inverter (no loads) : 20pF
5. Continuous output current : 50mA
6. Low Power Consumption : 20-µA

BY299 Fast recovery rectifier diode pack of 20pcs

Specifications

CD4047 Low power monostable astable multi vibrator 14 pins IC pack of 50pcs

Specifications

1. Low power multi vibrator circuit IC
2. Operate in both Monostable and Astable operation
3. Supply voltage range : 3V to 15V
4. DC input current  :  10mA
5. Number of pins : 14
6. Low power consumption
7. High noise immunity

GPF X2 0.033µF K 275VAC Electromagnetic Interference Suppression Capacitor pack of 5pcs

Specification

1. Rated voltage : 275VAC
2. Dimensions = 13.0mm(W)
3. Dimensions = 12.0mm(H)
4. Dimensions = 6.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB/T 14472-98
7. Capacitance Tolerance = ±5%(K)
8. Insulation Resistance = > 15000M Ω 

0.3 inch 2 digit Red display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common anode
4. Number of pins : 10
5. LED color : Red
6. Operating current : 10mA
7. Length of the LED : 15mm
8. Width of the LED : 14mm

Electronic Spices 1000Pcs 10k Ohm (Ω) 2watt ±5% Tolerance 10k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance : 10K ohm
• Tolerance : 5%
• Resistor type : carbon film
• Power rating : 2W
• Max. operating voltage : 180V to 240V

330uf 35V Aluminum Electrolytic Capacitors (10 X 16 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 41
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.