ALL ELECTRONICS COMPONENTS

330uf 35V Aluminum Electrolytic Capacitors (10 X 16 mm) Pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 10 x 16 mm
• Impedance (O)max. 20°C 1000KHz = 41
• Ripple current = 770
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

TLC5940 16-Channel PWM Control LED Driver IC (DIP-28 Package)

Specification:-

• No. of Channels: 16
• CMOS Level I/O
• 30 MHz Data Transfer Rate
• Supply voltage range: 3.V to 5.5V
• Drive Capability: 0 mA to 60 mA (VCC < 3.6 V)
• Thermal error flagging

10uf / 400V Aluminium Electrolytic Capacitors (10 X 13)mm pack of 5 pcs

Specification

1. Terminals: 2
2. Material: Aluminium
3. Capacitor Size: 10 x 13 mm
4. Voltage Rating :  400 V
5. Capacitance: 10uf

2.2uf / 450V Aluminum Electrolytic Capacitors (10 X 12.5)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 10 X 12.5mm
4. Voltage Rating :  450V
5. Capacitance: 2.2uf
6. Capacitance tolerance : ±20%(M)

120uf 450V Aluminum Electrolytic Capacitors (25 x 35mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 25 x 35 mm
  
• Ripple current = 0.80
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"

14 Pin DIP IC Socket Base Power Supply Adaptor Pack of 5

Specification:-

• Power Source: DC
• Number of Pin: 14 Pin
• Contacts resistance: 10 mW
• Current rating: 1 A
• Protected open entry for easy insertion of IC
• Easy to insert and remove ICs

1.0μF 105J 630V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 630V
• Dmax = 19.0mm
• Lmax = 33.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

A42 Bipolar NPN transistor packs of 100pcs

Specification:-

1. Transistor type  :  Bipolar NPN Transistor
2. DC Current gain  :  40
3. Continuous collector current  :  500mA
4. Base- Emitter voltage  :  6V
5. Collector-Emitter voltage  :  300V

10K ohm ( Ω ) single turn trimpot variable resistors 3386P-1-103LF pack of 50pcs

Specifications

1. Type                            : single turn variable resistor
2. Resistance value       : 10K Ω
3. Power rating              : 300V
4. Temperature Range : -55 °C to +125 °C
5. Rotational cycle        : 200 cycles

200K ohm ( Ω ) vertical preset variable resistors ( 204 ) pack of 20pcs

Specifications

1. Type: preset variable resistor (trim pot)
2. Resistance value: 200K Ω
3. Max. operating voltage: 50V DC
4. Rotation: single turn
5. Resistance Tolerance: ±30%
6. Rotational cycles: 20 cycles

Electronic Spices 50Pcs 2.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 2.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 2.7K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 50pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each