ALL ELECTRONICS COMPONENTS

BF422 Bipolar High voltage NPN transistors pack of 100pcs

Specification:-

1. Transistor type  :  High voltage NPN transistor
2. Maximum Collector power dissipation  :   0.83W
3. Maximum Collector-Base voltage  :  250V
4. Maximum Collector-Emitter voltage  :  250V
5. Maximum Emitter-Base voltage  :  5V
6. Maximum Collector current   :  0.05A
7. Transition frequency  :  60 MHz
8. Collector capacitance  :  1.6 pF

IR2153 Self Oscillating Half Bridge Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side output voltage: -0.3 to VCC+0.3 V
• RT pin voltage: -0.3 to VCC+0.3 V
• Supply current (note 1): 25 mA

Electronic Spices 20Pcs 4.7 Ohm (Ω) 2watt ±5% Tolerance 4.7 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 4.7 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V

0.33μF 334J 400V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard: GB 10190 (IEC 384-16) 
2. Rated voltage: 400V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 11.5mm
8. Dimensions of Length : 28.0mm

Electronic Spices 50Pcs 10M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 10M MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 10M ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

3.3K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 3.3K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

4.7 ohm ( Ω ) 10 watt Fusible Ceramic Cement Power Resistor Pack of 5

Specification:-

• Resistance : 4.7 ohm (Ω)
• Tolerance : 5%
• Resistor type : fusible ceramic cement power resistor
• Power rating : 10W
• Can withstand in high-energy and high-voltages at high temperatures
• Reliable and offers a long service life

12V 30A Sugar cube Power relays HRG91-S-DC12V 5 pins pack of 100pcs

Specifications

1. Rating voltage : 12V
2. Normal open current : 40mA 250VAC/30VDC
3. Normal close current : 30mA 250VAC/30VDC
4. Maximum switching : 300 operating/minute
5. Compact 5-pin configuration

Electronic Spices 50Pcs 2.7k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 2.7k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 2.7K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 1M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1M MR Ω ohm MF Through Hole Resistors Axial Lead

0.015μF 153J 250VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250VAC
• Dimensions = 14.0mm(W)
• Dimensions = 13.0mm(H)
• Dimensions = 8.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

24C16 16K Bit standard 2 wire bus interface serial DIP 8 pins IC pack of 50pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes