ALL ELECTRONICS COMPONENTS

0.22μF 224J 630V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V 
2. Dimensions = 19.0mm(W)
3. Dimensions = 13.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 15.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance =  ≤7500M Ω

GBJ4, GBJ410 4A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ4
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 4.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 120A
6. Maxim forward voltage : 1.1V

Electronic Spices 5000Pcs 220k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 220k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

Electronic Spices 5000Pcs 15 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 15 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 15 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

0.01 µF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type: 1206
• Capacitance: 0.01uf
• Tolerance :  ± 10%
• Voltage range:50V
• Mounting Type: SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

2SC3356 NPN SOT23-3L Bipolar Transistors Pack of 5pcs

Specification :-

• Polarity: NPN
• Maximum Collector-Base Voltage |BVCBO|: 20 V
• Maximum Collector-Emitter Voltage |BVCEO|: 12 V
• Maximum Emitter-Base Voltage |BVEBO|: 3V
• Forward Current Transfer Ratio (hFE), MIN: 50
• Collector Dissipation: Pcw =200mW

2281 Dual channel LED lever meter driver monolithic DIP 16 pins IC pack of 50pcs

Specification

1. 100% Original and new product
2. Wide operating range  :  5V to 14V
3. Power dissipation : 600mW
4. Voltage gain : 13.4 dB
5. Capable of driving red, green, and yellow LED's
6. High input impedance
7. Applicable to 10 dot mono output

SR560/SB560 60V ,DO-201AD Schottky Barrier Rectifiers Pack of 20

Specification:-

• Maximum repetitive peak reverse voltage : 60V
• Maximum average rectified current : 5.0A
• Peak forward surge current 8.3ms single half sine- wave : 150A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : DO-201AD

MQ4 Methane, CNG and flammable gas detections sensors pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

7414 – Hex Schmitt Trigger SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 7V
• Input voltage: 5.5V
• Temperature Range: -65°C to 150°C
• Operation From Very Slow Edges

DO-41, R1800 1800V High Voltage Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 1800v
2. Maximum average rectified current : 0.5A
3. Maxim reverse current : 5.0µA
4. Case :  DO-41
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 2.0V

BZV55-C5V1 (SMD) 5.1V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 5.1V
• Low differential resistance
• Small hermetically sealed glass SMD package