ALL ELECTRONICS COMPONENTS

MQ4 Methane, CNG and flammable gas detections sensors pack of 10pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : Methane
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 750mW
7. Concentration scope : 200 to 10,000ppm

12K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 12K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watt
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

S9014LT1 NPN SOT-23 Bipolar Transistors Pack of 5pcs

Specification:-

1. Type of transistor: NPN
2. Polarity: Bipolar
3. Collector-emitter voltage (BVCEO): 45V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 150MHz
7. Gain H(fe): 200/1000
8. Collector current:  100mA

150 ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 150
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

1000 Pcs 680 Ohm (Ω) 1 Watt ±5% Tolerance 680 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications:

• Resistance : 680 ohm
• Tolerance : 5%
• Resistor type : carbon film
• Power rating : 1W
• Max. operating voltage : 180V to 240V

DB, DB105 1A 600V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : DB
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

4.7/400V LOW ESR KF Series Pack of 5pcs (8x12)mm

Specification:-

• Capacitor Value – 4.7
• Voltage  - 400V
• Operating temperature: -40ºC to 125ºC
• Tolerance - ±20%
• Size - 8x12

152mm x 101mm ( 6 x 4 inches ) Copper clad single side 1mm pitch printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 152mm x 101mm (6 x 4 inch)
3. Board thickness : 1 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

GPF X2 0.01µF K 275VAC Electromagnetic Interference Suppression Capacitor pack of 5pcs

Specification

1. Rated voltage : 275VAC
2. Dimensions = 13.0mm(W)
3. Dimensions = 11.0mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB/T 14472-98
7. Capacitance Tolerance = ±5%(K)
8. Insulation Resistance = > 15000M Ω 

220uf 6.3V Aluminum Electrolytic Capacitors (6.3 X 11 mm) pack of 5pcs

Specification

• Rating Voltage = 6.3V
• Material = Aluminum
• Capacitor Size = 6.3 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 130
• Ripple current = 250
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

CD4013 Dual D Type Flip-Flop SMD IC

Specification:-

• Wide supply voltage range: 3.0V to 15V
• High noise immunity: 0.45 VDD (typ.)
• DC Supply Voltage: -0.5 VDC to +18 VDC
• Input Voltage: 0.5 VDC to VDD +0.5 VDC
• Storage Temperature: -65°C to +150°C
• Power Dissipation: 700 mW
• Lead Temperature: 260°C

Electronic Spices 5000Pcs 470 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 470 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 470 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V