ALL ELECTRONICS COMPONENTS

100uf 50V Aluminum Electrolytic Capacitors (8 X 11.5 mm) Pack of 5pcs

Specification

• Rating Voltage = 50V
• Material = Aluminum
• Capacitor Size = 8 x 11.5 mm
• Impedance (O)max. 20°C 1000KHz = 74
• Ripple current = 400
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

820 ohm 0805 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 0805
2. Resistance : 820 ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

T1117-5 SOT 223 Voltage Regulator Pack of 100pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 4.950 - 5.050

0.0056μF 562J 630V CBB28 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 15.0mm(W)
3. Dimensions = 13.5mm(H)
4. Dimensions = 9.0mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  QB 1102-03
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 5000M Ω 

MMBTA92LT1 PNP SOT-23 Bipolar Transistors Pack of 5

Specification:-

1. Type of transistor: PNP
2. Polarity: Bipolar
3. Collector-emitter voltage (BVCEO): 300V
4. Power dissipation: 300mW
5. Case: SOT23
6. Frequency: 50MHz
7. Gain H(fe): 100/200
8. Collector current:  300mA

B1403 5 dot red green LED lever meter driver SIP 9 pins IC pack of 50pcs

Specification

1.  Capable of generating a bar-display
2. Operates from either AC or DC input voltage
3. Type : SIP LED driver
4. Supply voltage : 6V to 16V
5. Power dissipation  : 1100mW
6. Low noise

6.2v 0.5 watt 1N4735A Zener diodes ±5% voltage tolerance box of 2500pcs

Specification:

• Type : BZX55C6V2 ST
• Nominal Zener Voltage (VZ): 6.2V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 146mA

GBU, GBU3510 35A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBU
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 35.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 350A
6. Maxim forward voltage : 1.1V

1.5K 250V Metalized Polyester Film Capacitor Pack of 5

Specification:-

• Rated voltage: 250V
• Dimensions: 23.5mm(W)
• Dimensions: 16.5mm(H)
• Dimensions: 7.6mm(T)
• Dimensions: 20.8mm(P)

0.68μF 684J 100V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

1. Rated voltage = 100V
2. Dmax = 8.5mm
3. Lmax = 20.5mm
4. Reference Category = GB 7332 (IEC 384-2)
5. Climatic Category = 40/085/21
6. Voltage Proof = 1.6UR (5s)
7. Dissipation Factor = ≤1.0% (20°C, 1KHz)

0.68μF 684J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage: 250V
2. Dimensions = 25.0mm(W)
3. Dimensions = 18.0mm(H)
4. Dimensions = 8.0mm(T)
5. Dimensions = 15.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

1000uf 25V Aluminum Electrolytic Capacitors (13 X 20 mm) Pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 13 x 20 mm
• Impedance (O)max. 20°C 1000KHz = 38
• Ripple current = 1300
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.