ALL ELECTRONICS COMPONENTS

SOT-23, ISS181 80V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : SOT-23
2. Maximum respective peak reverse voltage : 80v
3. Maximum average rectified current : 100A
4. Maxim reverse current : 0.5µA
5. Maxim forward voltage : 1.2V

3.9V 0.5watt 1N4730A Zener diodes ±5% voltage tolerance box of 2500

Specification:

• Type : BZX55C3V9
• Nominal Zener Voltage (V_Z): 3.9V
• Power dissipation (P_Z): 1300mW (practically 500mW)
• Zener regulator current (I_Zm): 234mA

2M ohm 0805 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 0805
2. Resistance : 2M ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

9015 Bipolar PNP transistor packs of 100pcs

Specification

1. Transistor Type  :  9015 Bipolar PNP transistor
2. Max Collector Current  :  -100mA
3. Max Collector-Emitter Voltage  :  -45V
4. Max Collector-Base Voltage  :  -50V
5. Max Emitter-Base Voltage  :  -5V
6. Max Collector Dissipation  :  400mW

MBS, MB10S 0.5A 1000V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : MBS
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 0.5A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 35A
6. Maxim forward voltage : 1.0V

12cm x 6.5cm Copper Clad Single Side 1mm Pitch General Purpose Printed Circuit (PCB)

Specification:-

• Copper-clad coating PCB
• Dimension: 12cm x  6.5cm
• Board thickness: 1mm
• Shape: Rectangle
• Circuit printing: Single side
• High wear and tear properties
• Excellent heat resistance

2SC2735 NPN SOT23-3L Bipolar Transistors Pack of 100pcs

Specification :-

• Polarity: NPN
• Maximum Collector-Base Voltage |BVCBO|: 30 V
• Maximum Collector-Emitter Voltage |BVCEO|: 20 V
• Maximum Emitter-Base Voltage |BVEBO|: 3V
• Forward Current Transfer Ratio (hFE), MIN: 40
• Collector Dissipation: Pcw = 150mW

2.2μF 225J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 18.0mm
8. Dimensions of Length : 33.0mm

4MHz Electronic quartz crystal oscillator D400A6 through hole 2 pins pack of 20pcs

Specification:-

1. High-quality product
2. Load Capacitance  :  18pF
3. Frequency Tolerance  :  30ppm
4. Frequency Temperature Stability  :  20ppm
5. Resonance Resistance  :  40 ohms
6. High frequency of operation
7. Automatic amplitude control and frequency drift

0.0033μF 332J 630V CBB28 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 630V
2. Dimensions = 15.0mm(W)
3. Dimensions = 12.5mm(H)
4. Dimensions = 7.5mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  QB 1102-03
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 5000M Ω 

1.0μF 250J 250V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 250V
• Dmax = 9.5mm
• Lmax = 28.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

1M ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 1M
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V