ALL ELECTRONICS COMPONENTS

0.10μF 104J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 24.0mm(W)
• Dimensions = 19.0mm(H)
• Dimensions = 12.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMB(G), GS3M 1000V Surface Mount General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case : SMB(G)
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 1.1V

BC338 800mA 25V TO-92 Package General purpose NPN transistor pack of 10 pcs

Specification

1. Collector-Emitter Voltage (VCEO): 25V
2. Continuous Collector Current (IC): 800mA
3. Transition Frequency (fT): 250MHz
4. DC Current Gain (hFE): 120-630
5. Operating Temperature Range: -55 - 150°C
6. Transistor type  :  NPN Transistor

CD4027 Dual JK Flip Flop IC (DIP-16 Package)

Specification:-

• Supply Voltage:  3V to +18V
• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• Maximum input current of 1 µA at 18 V
• Temperature range; 100 nA at 18 V and 25°C

Electronic Spices 50Pcs 3.9k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 3.9k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 3.9K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

BZV55-C6V2 (SMD) 6.2V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 6.2V
• Low differential resistance
• Small hermetically sealed glass SMD package

2SC1623 100mA 50V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 50V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 250MHz
7. Gain H(fe): 90/600
8. Collector current:  100mA

S9015LT1 PNP SOT-23 Bipolar Transistors Pack of 5pcs

Specification:-

1. Type of transistor: PNP
2. Polarity: Bipolar
3. Collector-emitter voltage (BVCEO): 45V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 150MHz
7. Gain H(fe): 200/1000
8. Collector current:  100mA

0.10μF 104J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 9.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

TC4420 6A High-Speed MOSFET Driver IC

Specification:-

• Supply Voltage: +20V
• Input Voltage: – 5V to VDD + 0.3V
• Input Current (VIN > VDD): 50 mA
• High Capacitive Load Drive Capability: 10,000 pF
• Wide Input Supply Voltage Operating Range: – 4.5V to 18V
• Package Power Dissipation 5-Pin TO-220 (With Heatsink): 12.5W
• Output Voltage Swing to Within 25 mV of Ground or VDD
• Thermal Impedances (To Case) 5-Pin TO-220: 10°C/W

1N4750A 27V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 27V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 750mA

C2383 Epitaxial NPN silicon's transistors box of 2000pcs

Specifications:-

1. Transistor type  :  Epitaxial NPN Transistor
2. Power dissipation  :  0.9W
3. Collector current  :  1A
4. Working temperature  :  -55O C to +150O.
5. Lead-free
6. Voltage consumption  :  160V.