ALL ELECTRONICS COMPONENTS

3.9 ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 3.9 ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

0.0033μF 332J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage: 100V
2. Dimensions = 10.5mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω

0.068μF 683J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 24.0mm(W)
• Dimensions = 18.0mm(H)
• Dimensions = 11.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

KTC3880S 20mA 30V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 30V
4. Power dissipation: 150mW
5. Case: SOT23
6. Frequency: 500MHz
7. Gain H(fe): 40/200
8. Collector current:  20mA

MC33153P Single IGBT Gate Driver IC (DIP-8 Package)

Specification:-

• Power Supply Voltage: 20 V
• Logic Input: VEE −0.3 to VCC V
• Current Sense Input: −0.3 to VCC V
• Blanking/Desaturation Input: −0.3 to VCC V
• Maximum Power Dissipation = 50°C: 0.56W
• Operating Junction Temperature: 150 °C
• Operating Ambient Temperature: -40 to 105 °C
• Storage Temperature Range: -65 to +150 °C

SMA(G), SK24 40V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA(G) 
2. Maximum respective peak reverse voltage : 40v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.55V

Electronic Spices 5000Pcs 1.5M Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1.5M MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

• Resistance: 1.5M ohm (Ω)
• Resistor type : carbon film resistor
• Tolerance: 5%.
• Power rating: 1/4Watt.

0.22uf / 50V Aluminum Electrolytic Capacitors (5 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 5 x11mm
4. Voltage Rating :  50V
5. Capacitance: 0.22uf
6. Capacitance tolerance : ±20%(M)

74LS47 BCD to 7-Segment Decoder/Driver SMD IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Supply Voltage range: 4.5 to 5.5V
• Output Current (High): -50mA
• Output Current (Low): 3.2A
• Operating Temperature: -55°C to 125°C

TL082 JFET Input Operational Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typica
• Low Power Consumption: 1.4 mA/ch Typical
• Wide Common-Mode and Differential Voltage Ranges

2000Pcs 100K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 100K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 100K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

BC237S NPN Transistors 45V (SOT-23 Package) Pack of 10

Specification :-

• Transistor Type  :  NPN transistor
• DC Current Gain (hFE) : 120-800
• Max Transition Frequency (fT): 200 MHz
• Collector-Emitter Voltage (VCEO) : 45V